期刊文献+

高温固相法制备纳米LiFePO_4/C研究

Research on the nanosized LiFePO_4/C prepared by solid-state method at high temperature
下载PDF
导出
摘要 采用高温固相法分两个步骤制备碳包覆LiFePO4/C样品,通过XRD、TEM及电化学性能测试对样品进行检测分析,显示样品为纯相LiFePO4,颗粒均匀且包覆较好的碳包覆结构,在1.44C倍率下的首次放电比容量为128mAh/g,100次循环后的放电比容量为120mAh/g,保持率为93.8%,具有较好的充放电循环性能。 Carbon coated LiFePO4 composite was synthesized with a two-step process by solid- state method at high temperature. The results of XRD, SEM and electrochemical tests showed that the sample was pure LiFePO4 with uniform particle size and well carbon coated structure. The sample had good charge-discharge and cycle performance, its specific discharge capacity at 100th cycle at 1.44C was 120 mAh/g , 93.8% of the initial capacity of 128 mAh/g.
出处 《电池工业》 CAS 2012年第3期157-160,共4页 Chinese Battery Industry
关键词 高温固相法 前躯体 碳包覆 solid state method at high tempreture precursor~ carbon-coated
  • 相关文献

参考文献8

  • 1Padhi A K, Nanjundaswamy K S, Masquelier C, et al.Phospho - otivines as positive-electrode materials for rechargeable lithium batteries [J]. Electrochem Soc, 1997, 144(4): 1188--1194.
  • 2Kadoma Y, Kim J-M, Abiko K, et al. Optimization of electrochemical properties of LiFePO4/C prepared by an aqueous solution method using sucrose[J]. Electrochim Acta, 2010, 55: 1034--1041.
  • 3Liu Y, Cao C. Enhanced electrochemical performance of nano-sized LiFePO4/C synthesized by an ultrasonic-assisted co-precipitation method [J]. Electrochim Acta, 2010, 55: 4694--4699.
  • 4Maosen Pan, Zhentao Zhou. Carbon rich surface of LiFePO4 grain enhancing its rate capability [J]. Materials Letters, 2011, 65: 1131--1133.
  • 5Di Zhang, Rui Cai, Yinke Zhou, et al. Effect of milling method and time on the properties and electrochemical performance of LiFeP04/C composites prepared by ball milling and thermal Treatment[J]. Electroehimica Acta, 2010, 55: 2653--2661.
  • 6陈性保.50Ah LiFePO_4聚合物锂离子单体电池的制备[J].电池,2009,39(1):34-35. 被引量:7
  • 7Markevicha E, Sharabi R, Haik O, et al. Raman spectroscopy of carbon-coated LiCoPO4 and LiFePO4 olivines[J]. Journal of Power Sources, 2011, 196: 6433- 6439.
  • 8Shehuang Wua, JeJang Shiua, JengYu Linb. Effects of Fe2 P and Li3 PO4 additives on the cycling performance of LiFePO4/C composite cathode materials[J]. Journal of Power Sources, 2011, 196: 6676--6681.

二级参考文献5

  • 1HUANG Sui-yang(黄穗阳).高安全性和低成本聚合物锂离子动力电池[A].2006华南锂电高层论坛论文集[C].Shenzhen(深圳):2006.15-28.
  • 2LIANG Qi(梁奇),CHEN Xiu-li(陈修丽),ZHENG Wei-gong(郑为工),et al.LiFePO4-based lithium ion batteries[A].2007年中韩锂电池技术交流会论文集[C].Shenzhen(深圳):2007.
  • 3WANG J Q.Progress on lithium ion batteries with LiFePO4 as positive material for EV & other applications[A]. The 3rd Korea- China Lithium Battery Workshop[ C]. Chang-Won:2007.19 - 51.
  • 4Kim J. Nanoerystalline olivine LiFePO4:a new synthetic route and its characterization [ A ] .The 3rd Korea-China Lithium Battery Workshop[ C ]. Chang-Won: 2007.71 - 90.
  • 5程建聪,陈性保,董全峰.聚合物锂离子电池的高倍率放电性能研究[J].电池,2007,37(5):329-332. 被引量:12

共引文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部