基于ANSYS的微动刀架设计与分析
摘要
设计了一种采用无耦合位移、低应力集中的双平行四杆机构作为弹性体的微动刀架,并对微动刀架进行了理论分析与有限元仿真。结果表明,该微动刀架的设计达到要求。
出处
《机电信息》
2012年第27期142-143,共2页
基金
榆林学院高层次人才科研启动基金项目
项目编号:08GK037
参考文献5
-
1李玉和,李庆祥,陈璐云,白立芬.单轴柔性铰链设计方法研究[J].清华大学学报(自然科学版),2002,42(2):172-174. 被引量:62
-
2沈剑英,杨世锡,周庆华,严拱标,曹坚.单平行四杆柔性铰链机构的输出位移和耦合误差分析[J].机床与液压,2004,32(3):27-28. 被引量:15
-
3陈时锦,杨元华,孙西芝,程凯.基于柔性铰链的微位移工作台性能分析与优化设计[J].机械设计,2004,21(7):46-49. 被引量:15
-
4赫玉娟,田延岭,张大卫,高咏生.新型精密磨削辅助微进给平台的研制及特性研究[J].制造技术与机床,2004(4):39-42. 被引量:5
-
5李尚平,张鸿海,孙桂静,谢良富,陈日曜,师汉民.一种毫微米级进给机构几个问题的研究[J].中国机械工程,1993,4(1):19-21. 被引量:4
二级参考文献19
-
1Yihui Wu, Xiaodong Tong, Liding Wang. Monolithic micromanipulator with flexure hinges. Proceedings of the International Symposium on Micro Machine and Human Science 1994, IEEE, Piscataway, NJ, USA, 94TH 0707 -0. p119 - 122.
-
2Gao Y Sh, Zhang D W and Yu Ch W. Dynamic Modeling of A Novel Workpiece Table for Active Surface Grinding Control, Int. J. of Mach.Tools Manufact. , 2001,41:609 -624
-
3Otsuka J and Koshimizu S, et al, An Ultra - fine Motion Using Piezoeletric Actuator for Ultra - precision Grinding, Int. J. of Japan Soc.Prec. Engg. , 1996,30(4) :345 -346
-
4Zhong Z, Nakagawa T. Development of a Micro Displacement Table for Ultra - precision Machining and Grinding for Curved Surfaces by the Use of It, Int. J. of Japan Soc. Prec. Eng. , 1992,6(2) :102 - 107.
-
5Kim J D and Nam S R. Development of a Micro - positioning Grinding Table Using Piezoelectric Voltage Feedback, Proc. of the Institution of Mechanical Engineers Part B - Journal of Engineering Manufacture.1995,209 (B6) :469 -474
-
6Gao Y, Zhang D W,Yu Ch W, et al. Detachment Modeling of A Novel Workpiece Micro - positioning Table Under Preload Hertz Contact,Prec. Eng. , 2002,26( 1 ) :83 -92
-
7Paros J M, Weisbord L. How to design flexure hinge[J].Machine Design, 1965, 37: 151 - 157.
-
8Wei Xu, Tim King. Flexure hinges for piezoactuator displacement amplifiers: flexibility, accuracy, and stress considerations[J].PrecisionEng, 1996, 19: 4- 10.
-
9Smith S T, Chetwynd D G, Bowen D K. Design and assessment of monolithic high- precision translation mechanisms[J]. J Phys E: Sci Instrum, 1988, 20:977-983.
-
10Elmustafa A A. Laga]ly Max G. Flexural- hinge guided motion nanopositioner stage for precision machining: finite element simulations[J]. PrecisionEng, 2001, 25: 77 - 81.
共引文献89
-
1陈贵敏,贾建援,刘小院,勾燕洁.柔性铰链精度特性研究[J].仪器仪表学报,2004,25(z3):107-109. 被引量:17
-
2陈贵敏,贾建援,勾燕洁.混合型柔性铰链研究[J].仪器仪表学报,2004,25(z3):110-112. 被引量:14
-
3陈时锦,杨元华,孙西芝,程凯.基于柔性铰链的微位移工作台性能分析与优化设计[J].机械设计,2004,21(7):46-49. 被引量:15
-
4秦振,阎绍泽.压电陶瓷驱动微小型步行机的设计与仿真研究[J].机械设计与研究,2004,20(4):15-17. 被引量:4
-
5万德安,刘春节,汲长志.精密小转矩加载机构的研制[J].机械设计,2004,21(8):20-22.
-
6万德安,刘春节,汲长志.压电驱动微型振动平台的仿真分析[J].计算机仿真,2004,21(10):31-33. 被引量:2
-
7马洪文,姚绍明,谭久彬.超声波电动机驱动大行程柔性导轨设计[J].现代制造工程,2004(12):86-88.
-
8万德安,刘春节,汲长志.压电驱动微位移放大机构的分析与实验[J].机床与液压,2005,33(2):12-13. 被引量:14
-
9巩娟,李庆祥,李玉和.新型三维微动台的设计与试验分析[J].现代制造工程,2005(2):115-117. 被引量:1
-
10冯晓国.二元光学激光直写设备高精度传动系统的研究[J].仪器仪表学报,2005,26(3):275-278.
-
1瞿志俊,吴星晨.一种新型攀爬机器人结构设计[J].机床与液压,2014,42(21):68-70. 被引量:2
-
2朱革,郭增强,王先全,罗静,袁亚辉.非等齿耦合位移传感器的研究[J].传感器与微系统,2012,31(2):52-53.
-
3王年平,葛宰林,谭晓丽.平行四杆机构杆长尺寸误差对机构性能的影响分析[J].企业标准化,2008(13):40-41. 被引量:4
-
4汤修映,李伟,张铁中,拓广忠.平行四杆机构在点焊机器人中的作用[J].中国农业大学学报,2003,8(4):36-40. 被引量:6
-
5专利摘要[J].清洗世界,2007,23(6):39-39.
-
6新型移动升降台[J].建厂科技交流,2004,31(4):76-76.
-
7范文浩,毕树生,王巍,孙亮.舵机刚度及间隙测试设备的设计与研究[J].机械工程与自动化,2016(2):168-170. 被引量:3
-
8许允斗,姚建涛,赵永生.一种典型DDS锻造操作机运动学分析[J].机械工程学报,2012,48(3):50-56. 被引量:10
-
9汤文成,易红,幸研.应力流驱动的结构拓扑优化[J].南京理工大学学报,2003,27(6):728-732.
-
10李茂,毕树生,王玉亮,李晓来.二维解耦柔性精密定位平台设计[J].机械设计与制造,2015(11):26-30. 被引量:2