摘要
针对某选钛尾矿储量大、且其中含钛4.58%的现状,通过三种工艺方案试验研究对比,最终采用"高梯度强磁粗选—磨矿—高梯度强磁精选—摇床"的选矿工艺,得到含钛品位45.39%、回收率39.39%的钛精矿。
Based on present situation of a titanium tailings which is large reserves and titanium containing 4.58%, via three processing program experimental study on scheme comparison, finally using the mineral processing of high gradient magnetic roughing-grinding-high gradient magnetic cleaning-table concentrator selection, obtained containing titanium grade 45.39% with the recovery of 39.39% titanium concentrate.
出处
《四川有色金属》
2012年第3期23-25,共3页
Sichuan Nonferrous Metals
关键词
选钛尾矿
工艺方案
高梯度强磁选机
titanium tailing
processing program
high gradient magnetic separator
