摘要
针对调频引信信号特征参数提取方法的抗噪声性能差及工程实现难度大的问题,提出了一种基于高速定点DSP的无线电引信信号特征参数的提取方法。该方法首先在DSP中对截获到的引信信号进行周期提取并将其长度补零至2m点,然后对处理后的信号进行二维自相关变换,最后结合信号本身的特性,在相关域提取出信号的调制参数。仿真与测试结果表明,在不依赖于任何先验信息的条件下,该方法能够精确地提取出锯齿线性调频连续波引信信号的调制参数,且具有较强的抗噪声性能。完成的系统具有高的可靠性和实时性。
In order to solve the problems of poor anti-noise ability and it is difficult to realize parameters extraction of FM fuze signal,a parameters extraction method for radio fuze signal based on high speed fixed DSP was proposed in this paper.Firstly,in the DSP,this method picked up periods signal from the received signal and made its length to padding zeros;then two-dimensional autocorrelation transformation was completed for the processed signal;finally,according to the characteristic of fuze signal itself,the characteristic parameter was extracted on ambiguity function.The simulation and test results showed that the characteristic parameters of LFMCW could be estimated accurately,and the method had good anti-noise ability which needs no prior information,high reliability and real-time property.
出处
《探测与控制学报》
CSCD
北大核心
2012年第4期15-19,共5页
Journal of Detection & Control
基金
国家部委基金项目资助(9140A05040510BQ0201)