期刊文献+

Green's function solution for transient heat conduction in annular fin during solidification of phase change material 被引量:1

Green's function solution for transient heat conduction in annular fin during solidification of phase change material
下载PDF
导出
摘要 The Green's function method is applied for the transient temperature of an annular fin when a phase change material (PCM) solidifies on it. The solidification of the PCMs takes place in a cylindrical shell storage. The thickness of the solid PCM on the fin varies with time and is obtained by the Megerlin method. The models are found with the Bessel equation to form an analytical solution. Three different kinds of boundary conditions are investigated. The comparison between analytical and numerical solutions is given. The results demonstrate that the significant accuracy is obtained for the temperature distribution for the fin in all cases. The Green's function method is applied for the transient temperature of an annular fin when a phase change material (PCM) solidifies on it. The solidification of the PCMs takes place in a cylindrical shell storage. The thickness of the solid PCM on the fin varies with time and is obtained by the Megerlin method. The models are found with the Bessel equation to form an analytical solution. Three different kinds of boundary conditions are investigated. The comparison between analytical and numerical solutions is given. The results demonstrate that the significant accuracy is obtained for the temperature distribution for the fin in all cases.
出处 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 2012年第10期1265-1274,共10页 应用数学和力学(英文版)
关键词 annular fin analytical solution Green's function phase change material(PCM) SOLIDIFICATION thermal energy storage annular fin, analytical solution, Green's function, phase change material(PCM), solidification, thermal energy storage
  • 相关文献

参考文献18

  • 1Kraus, A. D., Aziz, A., and Welty, J. Extended Surface Heat Transfer, Wiley, New York (2001).
  • 2Cheng, C. Y. and Chen, C. K. Transient response of annular fins of various shapes subjected to constant base heat fluxes. Journal of Physics D: Application Physics, 27, 2302-2306 (1994).
  • 3Campo, A. and Rodriguez, F. Approximate analytic temperature solution for uniform annular fins by adapting the power series method. International Communications in Heat and Mass Transfer, 25, 809-818 (1998).
  • 4Koonprasert, S. and Sangsawang, R. Analytical solution and symbolic computation for the temperature distribution of the annular fin under fully wet-surface condition. Proceedings of International Conference of Numerical Analysis and Applied Mathematics, Vol. 1048, American Institute of Physics, New York, 324-327 (2008).
  • 5Sharqawy, M. H. and Zubair, S. M. Efficiency and optimization of straight fins with combined heat and mass transfer-an analytical solution. Applied Thermal Engineering, 28, 2279-2288 (2008).
  • 6Aziz, A. and Rahman, M. M. Thermal performance of a functionally graded radial fin. International Journal of Thermophysics, 30, 1637-1648 (2009).
  • 7Cole, K. D., Tarawneh, C., and Wilson, B. Analysis of flux-base fins for estimation of heat transfer coefficient. International Journal of Heat and Mass Transfer, 52, 92-99 (2009).
  • 8Malik, M. Y. and Rafiq, A. Two-dimensional fin with convective base condition. Nonlinear Analysis: Real World Applications, 11, 147-154 (2010).
  • 9Lamberg, P. and Siren, K. Analytical model for melting in a semi-infinite PCM storage with an internal fin. Heat and Mass Transfer, 39, 167-176 (2003).
  • 10Lamberg, P. Approximate analytical model for two-phase solidification problem in a finned phasechange material storage. Applied Energy, 77, 131-152 (2004).

同被引文献15

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部