期刊文献+

An Investigation on a Tin Fixed Abrasive Polishing Pad with Phyllotactic Pattern for Polishing Wafer 被引量:2

An Investigation on a Tin Fixed Abrasive Polishing Pad with Phyllotactic Pattern for Polishing Wafer
下载PDF
导出
摘要 In order to improve the polishing ability of polishing pads, a kind of polishing pad with the tin fixed abrasive blocks, which are arranged based on the phyllotaxis theory of biology, was designed and fabricated by the use of electroplating technology, and also its polishing ability for JGS-2 wafer was investigated by polishing experiments. The research results show that the phyllotactic parameters of the polishing pad influence the arrangement density of the tin fixed abrasive blocks, the polishing pad with phyllotactic pattern is feasibly fabricated by the use of electroplating technology, and the good polishing result can be obtained by using the polishing pad with phyllotactic pattern to polish a wafer when the diameter D of the tin fixed abrasive block is between Φ1.3 mm and Φ1.4 mm, and the phyllotactic coefficient k between 1.0 and 1.1,respectively. In order to improve the polishing ability of polishing pads, a kind of polishing pad with the tin fixed abrasive blocks, which are arranged based on the phyllotaxis theory of biology, was designed and fabricated by the use of electroplating technology, and also its polishing ability for JGS-2 wafer was investigated by polishing experiments. The research resuits show that the phyllotactic parameters of the polishing pad influence the arrangement density of the tin fixed abrasive blocks, the polishing pad with phyllotactic pattern is feasibly fabricated by the use of electroplating technology, and the good polishing result can be obtained by using the polishing pad with pbyllotactic pattern to polish a wafer when the diameter D of the tin fixed abrasive block is between Φ. 3 mm and Φ1. 4 mm, and the phyllotactic coefficient k between 1.0 and 1.1, respectively.
出处 《Defence Technology(防务技术)》 SCIE EI CAS 2012年第3期174-180,共7页 Defence Technology
基金 Sponsored by the National Nature Science Foundation of China (50875179)
关键词 machinofature technique and equipment POLISHING polishing pad phyllotactic pattern machinofature technique and equipment polishing polishing pad phyllotactic pattern
  • 相关文献

参考文献1

二级参考文献17

  • 1P O Hahn. The 300 mm silicon wafer-A cost and technology challenge. Microelectronic Engineering, 2001, 56 (1, 2):3 ~13.
  • 2International Technology Roadmap for Semiconductors. Interconnect, ITRS, 2001 Eidtion, http: //public. itrs. net/.
  • 3B L Gehman. In the age of 300mm silicon, tech standards areeven more crucial. Solid State Technology, 2001, 44 ( 8 ): 127 ~ 128.
  • 4E Funkenbusch. Slurry Free Oxide CMP Techniques. 3M ' Semicon West, 1998.
  • 5P Van der Velden. Chemical Mechanical Polishing Using Fixed Abrasives. SEMI Europa, 1998.
  • 6Muneyuki Matsumoto, Keisuke Suzuki, Tatsuya Sakamoto, et al. Technology challenges for advanced Cu CMP using a new slurry free process. IEEE International technology conference, 1999.92 ~ 94.
  • 7J Gagliardi, T Vo. STI Polishing with 3M's Fixed Abrasive. 1999 VMIC 16th International VLSI Multilevel intercon nection Conf, Sep, 1999. 6 ~9.
  • 8J Gagliardi, T Buley. 3M SlurryFreeTM CMP Technical Brief: Fixed Abrasives For Direct HDP STI CMP. 3M Internal Pub, Jun, 2001.
  • 9P van der Velden. Chemical Mechanical Polishing With Fixed Abrasives Using Different Subpads to Optimize Wafer Uni formity. Microelectronic Engineering, 2000, 50 (1-4): 41 ~46.
  • 10V H Nguyen, A J Hof, H Van Kranenburg, et al. Copper chemical mechanical polishing using a slurry-free technique. Microelectronic Engineering, 2001, 55 (1-4): 305 ~312.

共引文献9

同被引文献47

引证文献2

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部