Study of the Material Transfer Characteristics and Surface Morphology Due to Arc Erosion of PtIr Contact Materials 被引量：1

Study of the Material Transfer Characteristics and Surface Morphology Due to Arc Erosion of PtIr Contact Materials

下载PDF

导出

摘要 By means of breaking tests on PtIr contact materials via a JF04C contact material testing machine, it was attempted to elucidate the characteristics of the various surface morphology and material transfer after the arc erosion process caused by break arc. The material transfer characteristics appeared in the experiments were concluded and analyzed. Meanwhile, the morphology of the anode and cathode surface were observed and analyzed by SEM. By means of breaking tests on Ptlr contact materials via a JF04C contact material testing machine, it was attempted to elucidate the characteristics of the various surface morphology and material transfer after the arc erosion process caused by break arc. The material transfer characteristics appeared in the experiments were concluded and analyzed. Meanwhile, the morphology of the anode and cathode surface were observed and analyzed by SEM.

作者 WANG Saibei XIE Ming YANG Youcai ZHANG Jiming CHEN Yongtai LIU Manmen YANG Yunfeng HU Jieqiong CUI Hao

机构地区 State Key Laboratory of Advanced Technologies for Comprehensive Utilization of Platinum Metals

出处《贵金属》 CAS CSCD 北大核心 2012年第A01期128-133,共6页 Precious Metals

基金 The National Nature Science Foundation of China(No.u0837601)

关键词 PtIr contact materials arc erosion material transfer surface morphology Ptlr contact materials arc erosion material transfer surface morphology

分类号 TG146.3 [金属学及工艺—金属材料]

引文网络
相关文献

参考文献5

1荣命哲,赵志远,杨武.低压电器中电触头材料的转移[J].低压电器,1998(5):16-18. 被引量：9
2J. Swingler,A. Sumption.Arc erosion of AgSnO_2 electrical contacts at different stages of a break operation[J].Rare Metals,2010,29(3):248-254. 被引量：41
3张昆华,管伟明,孙加林,卢峰,陈敬超,周晓龙,杜焰.AgSnO_2电接触材料的制备和直流电弧侵蚀形貌特征[J].稀有金属材料与工程,2005,34(6):924-927. 被引量：45
4Jing Li1,2,Zhi-ying Ma11. School of Electrical Engineering,Xi’an Jiaotong University,Xi’an 710049,2. School of Electrical Information,Hunan Institute of Engineering,Xiangtan 411101,China..Research on arc erosion of silver-based alloy contact materials under low voltage,resistive load and small current at 400 Hz and 50 Hz[J].Journal of Pharmaceutical Analysis,2009,21(3):149-154. 被引量：1
5郭凤仪,王国强,董讷,Leuschner F.W..银基触头材料电弧侵蚀特性及裂纹形成机理分析(英文)[J].中国电机工程学报,2004,24(9):209-217. 被引量：21

二级参考文献18

1李靖,马志瀛,张深基,黄绍平,李建明.中频开关电器触头材料耐弧侵蚀试验测试系统设计[J].低压电器,2007(21):46-48. 被引量：5
2荣命哲,李艳培,刘定新,王小华.新型触点电接触性能测试系统的研制[J].电工材料,2005(1):17-21. 被引量：9
3[5]Sun Ming,Wang Qiping.The model of interaction between arc and AgMeO contacts materials[J].IEEE Trans.on CPMT,1994,17(3),490-494.
4[6]Kang S,Brecher C.Cracking mechanisms in Ag-SnO2 contacts materials and their role in the erosion process[J].IEEE Trans.on CHMT,1989,12(1):32-38.
5[10]Francisco HA,Wallace J.Effects of cracks on contacts operating under high contact force[J].IEEE Trans.on CPMT,1995,18(2):348-352.
6[12]Smith RA,Gu Haideng (Translated).Fatigue crack expansion [M].Xi'an:Xi'an Jiaotong University Press,1988
7DU Zuojuan,YANG Tianzu,GU Yingying,QIU Xiaoyong,DOU Aichun.Preparation of silver tin oxide powders by hydrothermal reduction and crystallization[J].Rare Metals,2007,26(5):470-475. 被引量：4
8王可健,王其平.非对称配对电触头的材料转移[J]西安交通大学学报,1985(04).
9MENG Fanbin,LU Jianguo,ZHU Yongqing,LU Ningyi,CHEN Zhichao,HUANG Qiutao.Failure characteristics of Ag-SnO_2 contact material in AC level[J].Rare Metals,2008,27(1):18-21. 被引量：2
10荣命哲,万江文,王其平.含微量添加剂的 AgSnO_2 触头材料电弧侵蚀机理[J].西安交通大学学报,1997,31(11):1-7. 被引量：24

共引文献102

1李靖,马志瀛,许利战.基于50和400Hz的开关电器触头材料耐弧侵蚀试验分析[J].低压电器,2008(21):12-15.
2王松,张吉明,刘满门,谢明,陈松.制备工艺对AgSnO_2(8)In_2O_3(4)电接触材料组织与性能的影响[J].稀有金属与硬质合金,2015,43(2):45-49. 被引量：11
3张昆华,孙加林,管伟明,卢峰,陈敬超,杜焰,周晓龙,陈松.热挤压工艺对反应合成AgSnO_2材料显微组织的影响[J].贵金属,2005,26(4):1-5. 被引量：12
4张昆华,孙加林,管伟明,卢峰,陈敬超,杜焰,周晓龙,陈松.热挤压工艺对反应合成AgSnO_2材料显微组织的影响[J].电工材料,2005(4):7-10. 被引量：1
5闫洪.2005年云南金属材料与加工年评[J].云南冶金,2006,35(2):46-54.
6周玮,臧春艳,何俊佳.电气参数和机械参数对继电器直流电弧的影响[J].中国电机工程学报,2006,26(19):151-155. 被引量：23
7张昆华,孙加林,管伟明,陈敬超,周晓龙,杜焰.反应合成制备Ag-Sn-O系电接触材料热力学分析[J].稀有金属材料与工程,2006,35(10):1581-1585. 被引量：9
8刘雪燕,尹娜,候智,王成建.对银和银金属氧化物电触点间断开弧的光谱研究[J].稀有金属材料与工程,2007,36(5):842-845. 被引量：2
9刘方方,陈敬超,郭迎春,耿永红,管伟明.反应合成AgSnO_2电接触材料的电弧侵蚀特性研究[J].贵金属,2007,28(3):24-28. 被引量：13
10刘方方,陈敬超,郭迎春,耿永红,管伟明.反应合成AgSnO_2电接触材料的电接触性能研究[J].稀有金属,2007,31(4):486-490. 被引量：15

同被引文献16

1邓忠民,吕贤勇,施安,刘建良,谢明.钌对铂合金接点材料抗熔焊性能的影响[J].中国有色金属学报,2001,11(z2):143-147. 被引量：4
2谢明,陈江,陈力,符世继,宁德魁,曾荣川,杨有才,李汝民,段云喜,郑福前.Pt-24Ir-RE合金的显微组织与性能研究[J].贵金属,2004,25(3):25-28. 被引量：6
3李立钧,张键,张峰,吴子征,曹银祥,陈统一,陈中伟.纵行神经束内电极在周围神经感觉信号采集分析中的应用[J].中国临床康复,2005,9(25):34-36. 被引量：1
4张建军.铂、铱金火花塞自动焊接设备[J].新技术新工艺,2005(10):33-34. 被引量：1
5博世新系列火花塞介绍[J].汽车维修与保养,2007(12):88-88. 被引量：1
6徐永海,罗小军,张招贤.烧结铂铱合金电极在电解水装置中的应用[J].电镀与涂饰,2009,28(9):74-75. 被引量：2
7隋晓红,韩兆龙,邵轶彬,周岱,任秋实.视觉假体铂铱合金微电极阵列的电场分析[J].上海交通大学学报,2010,44(9):1282-1286. 被引量：3
8康菲菲,张昆华,管伟明,陈松,张吉明.弥散强化相对PtIr5合金高温蠕变性能的影响[J].稀有金属材料与工程,2012,41(2):241-245. 被引量：5
9胡洁琼,谢明,张吉明,杨有才,刘满门,陈永泰.Pt-Ir系掺杂Zr,Mo,Y对合金相性能的影响[J].稀有金属材料与工程,2013,42(2):354-357. 被引量：8
10黄永德,何鹏,林铁松,冯吉才,Y.Norman Zhou,Zhou.铂铱合金与316L不锈钢微激光点焊气孔形成机理[J].稀有金属材料与工程,2013,42(10):2079-2082. 被引量：8

引证文献1

1肖雨辰,唐会毅,吴保安,李凤,汪建胜,罗维凡,刘庆宾.铂铱合金的应用现状[J].功能材料,2020,51(5):5053-5059. 被引量：4

二级引证文献4

1段顺飞,赵家春,吴跃东,童伟锋,董海刚.含铱废料回收技术研究进展[J].贵金属,2021,42(2):93-98. 被引量：6
2徐明玥,申兵伟,王塞北,张巧,谢明,陈松.贵金属阳极材料的应用与研究进展[J].贵金属,2022,43(4):77-86.
3施宏宇,陈南光,杨润林,周东.PtIr高温合金电火花线切割工艺参数优化研究[J].贵金属,2023,44(S01):23-27.
4朱丽仙,何俊杰,张仁银,付丽,周璇,毛勇.Pt-10Ir超细键合丝退火过程中组织与性能的演化规律研究[J].稀有金属材料与工程,2023,52(11):3931-3938.

1Jing Li1,2,Zhi-ying Ma11. School of Electrical Engineering,Xi’an Jiaotong University,Xi’an 710049,2. School of Electrical Information,Hunan Institute of Engineering,Xiangtan 411101,China..Research on arc erosion of silver-based alloy contact materials under low voltage,resistive load and small current at 400 Hz and 50 Hz[J].Journal of Pharmaceutical Analysis,2009,21(3):149-154. 被引量：1
2张新华,李惠芬,杨玉芳.ICP-AES可变浓度法测定PtIr和PdIr系列合金中的次成分Ir及杂质元素[J].光谱学与光谱分析,1993,13(1):107-110.
3Yanjun Zhou,Kexing Song,Jiandong Xing,Zhou Li,Xiuhua Guo.Arc Erosion Behavior of Cu–0.23Be–0.84Co Alloy after Heat Treatment: An Experimental Study[J].Acta Metallurgica Sinica(English Letters),2016,29(4):399-408.
4CHEN Wenge,KANG Zhanying,SHEN Hongfang,DING Bingjun.Arc erosion behavior of a nanocomposite W-Cu electrical contact material[J].Rare Metals,2006,25(1):37-42. 被引量：6
5Wang, Fusheng Zhou, Zaiming Liang, Ronghai Central-South University of Technology, Changsha 410083, China.INFILTRATION MECHANISM AND QUALITY CONTROL OF CONTACT MATERIALS[J].中国有色金属学会会刊：英文版,1993,3(3):36-41.
6J. Swingler,A. Sumption.Arc erosion of AgSnO_2 electrical contacts at different stages of a break operation[J].Rare Metals,2010,29(3):248-254. 被引量：41
7朱一帆,付海涛,李瑛,魏无际.青铜表面膜的红外光谱和原子力显微镜分析[J].南京工业大学学报（自然科学版）,2004,26(4):49-52. 被引量：4
8P.Verma,O.P.Pandey,A.Verma.Influence of Metal Oxides on the Arc Erosion Behaviour of Silver Metal Oxides Electrical Contact Materials[J].Journal of Materials Science & Technology,2004,20(1):49-52. 被引量：14
9K. W. Richter and H. Ipser Institut für anorganische Chemie, Universit?t Wien W?hringerstrasse 42, A-1090 Vienna, Austria.CONTACT MATERIALS FOR GaSb AND InSb: A PHASE DIAGRAM APPROACH[J].Acta Metallurgica Sinica(English Letters),2002,15(2):143-148.
10Thuong-Hien LE,Young-Hun CHAE,Seock-Sam KIM.Sliding Wear Behavior of Plasma Sprayed Zirconia Coating on Cast Aluminum against Silicon Carbide Ceramic[J].Journal of Materials Science & Technology,2005,21(5):666-670.

贵金属

2012年第A01期

浏览历史

内容加载中请稍等...