期刊文献+

两种不同管型的油冷却器的性能对比研究 被引量:5

Study on Performance Comparison of Two Different Tube-Typed Shell-and-Tube Oil-Coolers
下载PDF
导出
摘要 对于螺旋隔板花瓣管润滑油冷却器, 当壳程油侧压降为90 kPa时, 其总传热系数可达3200 W/(m2·K), 比螺旋隔板低肋管油冷却器高15%以上, 为普通弓形隔板光滑管油冷却器的5倍左右, 因而它是目前国内外传热效能最高的水冷壳管式油冷却器. For petal-shaped fin tube oil-cooler with helical baffle s, as the oil pressure drop in shell side is 90 kPa , the overall heat transfer coefficient of oil_cooler is 3200 W/(m2·K), which is 15% higher than that of low fin tube oil-cooler with helical baffles, and is 5 times as large as that of smooth tube oil-cooler with segmental baffles, so it is an efficient oil-cooler.
出处 《华南理工大学学报(自然科学版)》 EI CAS CSCD 北大核心 2000年第7期74-77,共4页 Journal of South China University of Technology(Natural Science Edition)
关键词 螺旋隔板 花瓣管 油冷却器 水冷壳管式 传热 helical baffles petal-shaped fin tube low fin tube oil-cooler
  • 相关文献

参考文献3

二级参考文献2

  • 1卓宁,孙家庆.工程对流换热[M]机械工业出版社,1991.
  • 2叶大均.热力机械测试技术[M]机械工业出版社,1981.

共引文献11

同被引文献44

引证文献5

二级引证文献21

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部