期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

航空发动机轴承腔油气两相流型的一个判断准则

A Criterion of the Oil/Gas Two-phase Flow Pattern in Aeroengine Bearing Chamber
下载PDF
导出
摘要 基于流型进行航空发动机轴承腔油气两相润滑分析是一个有潜力的研究途径,通过构建轴承腔油气两相流型与结构工况的关系,形成轴承腔油气两相流型的判断准则是其中重要的基础工作。借助描述轴承腔油气两相流的流型判别参数,构建轴承腔油气两相流型与结构工况的关联关系,提出轴承腔油气两相流型的判断准则,相关的轴承腔油气两相流试验现象支持了这一准则。研究工作实现了根据轴承腔结构工况条件预估轴承腔油气两相流型的途径,有助于基于流型分类进行轴承腔润滑分析和换热设计。 It is a potential method of reseach on two-phase oil/gas flow lubrication in aeroengine bearing chamber based on flow pattern classification, in which the identification to oil/gas two-phase flow pattern in bearing chamber is an important work. Based on the relationships between the two-phase oil/gas flow pattern and the match of geom- etry and operating condition in bearing chamber relying on nondimensional parameters and mean splashing parame- ter, a new method was proposed to identify flow pattern flow pattern identification by the present method agreed of oil/gas two-phase flow. The results of two-phase oil/gas well with the former experimental results. The present work realized evaluation of two-phase flow pattern according to the geometry and operating condition in bearing chamber, and it is conducive to analyzing two-phase oil/gas flow lubrication and designing heat transfer.
作者 刘曼利 陈国定 张永红 苏华
机构地区 西北工业大学机电学院
出处 《机械科学与技术》 CSCD 北大核心 2012年第10期1559-1563,共5页 Mechanical Science and Technology for Aerospace Engineering
基金 国家自然科学基金项目(50975233) 航空科学基金项目(20100453004)资助
关键词 发动机 轴承腔 油气两相流 流型 判断准则 engine bearing chamber oil/air two-phase flow pattern determination criterion
分类号 TH233.4 [机械工程—机械制造及自动化]
  • 相关文献

参考文献15

  • 1Wittig S, Glahn A, Himmelsbach J. Influence of high rotational speeds on heat transfer and oil film thickness in aero-engine bear- ing chamber [ J ]. Journal of Engineering for Gas and Tur- bines and Power, 1994,116 ( 2 ) : 395 - 401.
  • 2Glahn A, Wittig S. Two-phase air/oil flow in aero-engine bearing chambers assessment of an analytical prediction method the inter- nal wall heat transfer [ J ]. International Journal of Rotating Machinery, 1999,5 ( 3 ) : 155 - 165.
  • 3Busam S, Glahn A, Wittig S. Internal bearing chamber wall heat transfer as a function of operating conditions and chamber geome- try[J]. Journal of Engineering for Gas Turbines and Pow- er, 2000,122(2) :314 -320.
  • 4Gorse P, et al. Influence of operating condition and geometry on the oil film thickness in aeroengine bearing chambers [ J ]. Journal of Engineering for Gas Turbines and Power, 2006,128( 1 ).
  • 5Glahn A, et al. Feasibility study on oil droplet flow investigations inside aero Engine bearing chambers--PDPA techniques in com- bination with numerical approaches[ J]. Journal of Engineering for Gas Turbines and Power, 1996,118 (4).
  • 6Glahn A, et al. Droplet generation by disintegration of oil films at the rim of rotating disk[J]. Journal of Engineering for Gas Tur- bines and Power, Transactions of the ASME, 2002,124(1).
  • 7Farral M, Simmons K, Hibberd S. A numerical model for oil film flow in an aeroengine bearing chamber and comparison experi- mental data [ J ]. Journal of Engineering for Gas Turbines and Power, Transactions of the ASME, 2006,128( 1 ).
  • 8Farral M, et al. The effect of initial injection conditions on the oil droplet motion in a simplified bearing chamber [ J ]. ASME Journal of Engineering Gas Turbines Power, 2008,130 ( 1 ).
  • 9张凤娟,陈国定,吴昊天.基于神经网络的航空发动机轴承腔气液两相流流型辨识方法研究[J].润滑与密封,2005,30(2):44-46. 被引量：5
  • 10吴昊天,陈国定.轴承腔油气两相泡状流动的数值研究[J].机械工程学报,2008,44(9):70-75. 被引量：23

二级参考文献13

  • 1Monji H, Matsui G. Flow pattern identification of gas-liquid two-phase flow using a neural network. Third International Conference on Muhiphase Flow, Lyon, France, June, 1998.8 -12.
  • 2Mi Y, Ishii M, Tsoukalas L H. Vertical two-phase flow identification using advanced instrumentation and neural network. Nuclear Engineering and Design, 1998, 184 ( 2-3 ) :409 - 420.
  • 3BUSAM S, GLAHN S, WITTING S. Internal bearing chamber wall heat transfer as a function of operating conditions and chamber geometry[J]. Transactions of the ASME, Journal of Engineering for Gas Turbines and Power, 2000, 122(4): 314-320.
  • 4LEE C, PALMA P, SIMMONS K, et al. Comparison of computational fluid dynamics and particle image data for the airflow in an aeroengine hearing chamber[J]. Transactions of the ASME, Journal of Engineering for Gas and Turbines Power, 2005, 127(10): 697-703.
  • 5GLAHN A, WITTING S. Two-phase air/oil flow in aero-engine bearing chambers-assessment of an analytical prediction method for the internal wall heat transfer[J]. International Journal of Rotating Machinery, 1999, 5(3): 155-165.
  • 6GLAHN A, WITTING S. Two-phase flow in aero engine bearing chambers: characterization of oil film flows[J]. Transactions of the ASME, Journal of Engineering for Gas and Turbines Power, 1996, 118(7): 578-583.
  • 7PRINCE J, BLANCH W. Bubble coalescence and break- up in air-sparged bubble columns[J]. AIChE Journal, 1990, 36(10): 1 485-1 499.
  • 8LUO H, SVENDSEN H. Theoretical model for drop and bubble break-up in turbulent dispersions[J]. AIChE. Journal, 1996, 42(5): 1 225-1 233.
  • 9WITTING S, GLAHN A, HIMMELSBACH J. Influence of high rotational speeds on heat transfer and oil film thickness in aero-engine bearing chambers[J]. Transactions of the ASME, Journal of Engineering for Gas Turbines and Power, 1994, 116(4): 395-401.
  • 10MAQABLEH A, SIMMONS K, HIBBERD S, et al. CFD modeling of three-component air/oil flow and heat transfer in a rotating annulus[C]//Proceeding of 11th International Conference of CFD, Vancouver, 2003: 192-200.

共引文献26

机械科学与技术
2012年 第10期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部