摘要
讨论了使用多孔喷丝板纺制细旦 POY的主要工艺条件。通过选择合适的工艺条件 ,如在 2 5 0 0~ 2 80 0 m/m in的卷绕速度下 ,采用 2 90~ 30 5℃的纺丝温度 ,0 .3~ 0 .4m/s的侧吹风速 ,控制干燥切片含水率在 30 μg/g以下 ,纺丝张力在 0 .1~ 0 .15 c N/dtex,可以获得单丝纤度小于 1.72 dtex,单丝根数大于 72的高品质的
The process of producing polyester micro-POY with multi-hole-spinneret was discussed. Through selecting the proper process parameters, such as take-up speed in the range of 2 500~2 800 m/min, spinning temperature 290~305℃, quenching air speed 03~04 m/s, chip moisture content less than 30 μg/g and spinning tension 01~015 cN/dtex, the high\|quality POY yarn whose monofilament fineness and number are below 172 dtex and above 72 respectively can be obtained.
出处
《合成纤维工业》
CAS
CSCD
2000年第3期53-55,共3页
China Synthetic Fiber Industry
关键词
多孔喷丝头
细旦
纺制
涤纶
POY工艺
spinneret
fine denier
preoriented yarn
technological process
polyethylene terephthalate fiber