摘要
Cold-rolled steel sheets in automotive applications require an excellent deep draw ability, which is characterized by the Lankford value （r-value）. In this study, a correlation was identified between r-value and pancake-shaped grain flatness which is indicated as the ratio of grain diameter in the rolling direction （RD） and normal direction （ND） of sheets （dr/dn）. A mathematical model （ r = e^0.345（dn^1/2-dr^1/2） ） was developed to calculate r-value by the microstructure of steel sheets hot-rolled by compact strip production （CSP）. It is shown that the r-value is higher, if the microstructure of steel sheet is of pancake-shaped grains elongated in the rolling direction. The calculated r-value is confirmed to fit exactly to the measured one from the large-scale production.
Cold-rolled steel sheets in automotive applications require an excellent deep draw ability, which is characterized by the Lankford value （r-value）. In this study, a correlation was identified between r-value and pancake-shaped grain flatness which is indicated as the ratio of grain diameter in the rolling direction （RD） and normal direction （ND） of sheets （dr/dn）. A mathematical model （ r = e^0.345（dn^1/2-dr^1/2） ） was developed to calculate r-value by the microstructure of steel sheets hot-rolled by compact strip production （CSP）. It is shown that the r-value is higher, if the microstructure of steel sheet is of pancake-shaped grains elongated in the rolling direction. The calculated r-value is confirmed to fit exactly to the measured one from the large-scale production.
