摘要
结合沈67块油藏特征,研究了交联聚合物微球ESsc深部调驱体系封堵性能,进行聚合物微球室内岩心驱油模拟实验。实验结果显示:微球ESsc驱油时,当岩心渗透率在(500~3500)×10-3μm2范围内,微球驱对应采收率相对稳定,能满足化学驱提高采收率要求。另外,针对油藏孔隙吼道的多分布特征,在选择微球作为主调驱段塞时,应对特大孔隙采用过250目延迟体膨型颗粒调剖剂进行先期调剖。2009年在沈67块实施聚合物微球体系深部调驱先导试验,取得了较好效果。
According to reservoir characteristics of block Shen 67, it was studied on plugging performance of the cross - linked polymer microsphere (ESsc) system for deep profile modification and flooding, and carried out core flooding ex- periments. The experimental results show that if core permeability is within a range of values from 500 ~ 10 -3 m2 to 3500 ~ 10-3 m2' recovery factor of the ESsc flooding is relatively stable, so as to meet the requirement of chemical flooding en- hanced oil recovery. In addition, according to various distribution characters of pores and throats in block Shen 67, if ESsc is used as main drive slug, extra - large pores should be in advance plugged by the delayed expansion grains with 250 mesh. In 2009, pilot project was implemented in block Shen 67 and better results were obtained.
出处
《复杂油气藏》
2012年第3期80-83,共4页
Complex Hydrocarbon Reservoirs
关键词
聚合物微球
延迟体膨型颗粒
调驱
提高采收率
沈67块
polymer micro - ball
delayed volume expansion grain
profile control and oil displacement
enhanced oilrecovery
Block Shen 67