期刊文献+

不同温度水的冷却特性及45钢的水淬 被引量:7

Cooling Power of Different Temperature Water and Quenching of 45 Steel in Water
下载PDF
导出
摘要 采用KD-CB177全自动淬火介质冷却性能测定器测定了不同温度水的冷却曲线。研究了水温对45钢淬火硬度的影响。结果表明,随着水温的升高,其特性温度降低,冷却时间延长。当水温为20~40℃时,其最大冷却速度Vmax下降缓慢,在40~50℃时最大冷却速度Vmax则迅速下降。 The cooling curves of water at different temperatures were measured with KD-CB177 all-automatic quenching medium cooling tester.The effect of water temperature on the as-quenched hardness of 45 steel was investigated.The results indicate that with the elevation of water temperature its characteristic temperature will decrease and the cooling period will be prolonged.The maximum cooling rate of water at temperatures of 20 to 40 ℃ will slowly decrease but quickly decrease at temperatures of 40 to 50 ℃
出处 《热处理》 CAS 2012年第5期60-62,共3页 Heat Treatment
基金 国家科技重大专项(2009ZX0414-065)资助
关键词 水温 冷却曲线 硬度 water temperature cooling curve hardness
  • 相关文献

参考文献4

二级参考文献18

  • 1朱天正.PAG类淬火冷却介质的应用效果[J].金属热处理,1994,19(1):37-39. 被引量:3
  • 2薄鑫涛,周珊珊.UCON E型淬火介质在大模块工件上的应用[J].金属热处理,2006,31(9):87-91. 被引量:4
  • 3[1]Moore D.Developments in liquid quenchants [J].Heat Treatment of Metals,1999,3: 68-71.
  • 4[2]Totten G E.An overview of polymer quenchants [J].Industry Heating,1998,11: 29-31.
  • 5[4]Tensi G.The behavior of polymer quenchant [D].Bimingham: University of Bimingham,UK,1998.
  • 6CHEN Chun-huai(陈春怀).使用聚合物淬火剂出现变形和开裂的原因和对策[J].Material Science & Engineering for Enginery(兵器材料科学与工程),2001,(5):34-37.
  • 7CHEN Chun-huai(陈春怀).聚合物淬火介质的浓度测量[J].Mechanical Engineering Material(机械工程材料),2001,(4):22-25.
  • 8[7]Tensi H M,Stich A.Characterization of polymer quenchant [J].J Heat Treat,1993,5: 40-44.
  • 9CHEN Chun-huai(陈春怀),ZHOU Jing-en(周敬恩).聚合物淬火介质系统细菌滋生的讨论[J].Hot Working Technology(热加工工艺),2001,(2):19-22.
  • 10[9]Totton G.The Handbook of Quenching [M].ASM,1997.330-340.

共引文献26

同被引文献38

引证文献7

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部