期刊文献+

Mechanical and physical characterization of sodium hydroxide treated Borassus fruit fibers

Mechanical and physical characterization of sodium hydroxide treated Borassus fruit fibers
下载PDF
导出
摘要 In order to improve the properties by chemical modification and to optimize the alkali concentration, we treated Borassus fruit fine fibers with aqueous sodium hydroxide solutions of different concentra- tions. In each case, the tensile properties of the fibers were determined. The morphology of the untreated and alkali treated fibers was observed using scanning electron microscope. The surface of the fibers became rough on alkali treatment. The tensile properties of the fibers improved on alkali treatment. The fibers attained maximum tensile properties when treated with 15% aqueous sodium hydroxide solution and decreased thereafter. The crystallinity index of the fibers showed a similar trend. The thermal stability of the alkali treated fibers was found to be higher than that of untreated fibers. Further, the char content was maximum for fibers treated with alkali having concentration of 15% and above. The chemical composition indicated that the percentageof a-cellulose was maximum when the fibers were treated with 15% aqueous sodium hydroxide solution and then decreased thereafter thus indicating the beginning of degradation of the fibers at higher concentrations. Thus, the optimum concentration of NaOH was established as 15% for alkali treatment of the Borassus fibers. In order to improve the properties by chemical modification and to optimize the alkali concentration, we treated Borassus fruit fine fibers with aqueous sodium hydroxide solutions of different concentra- tions. In each case, the tensile properties of the fibers were determined. The morphology of the untreated and alkali treated fibers was observed using scanning electron microscope. The surface of the fibers became rough on alkali treatment. The tensile properties of the fibers improved on alkali treatment. The fibers attained maximum tensile properties when treated with 15% aqueous sodium hydroxide solution and decreased thereafter. The crystallinity index of the fibers showed a similar trend. The thermal stability of the alkali treated fibers was found to be higher than that of untreated fibers. Further, the char content was maximum for fibers treated with alkali having concentration of 15% and above. The chemical composition indicated that the percentageof a-cellulose was maximum when the fibers were treated with 15% aqueous sodium hydroxide solution and then decreased thereafter thus indicating the beginning of degradation of the fibers at higher concentrations. Thus, the optimum concentration of NaOH was established as 15% for alkali treatment of the Borassus fibers.
出处 《Journal of Forestry Research》 CAS CSCD 2012年第4期667-674,共8页 林业研究(英文版)
关键词 borassus fruit fine fiber chemical composition MERCERIZATION spectral analysis tensile properties thermal properties. borassus fruit fine fiber chemical composition mercerization spectral analysis tensile properties thermal properties.
  • 相关文献

参考文献40

  • 1Bolton J. 1995. The potential of plant fibers as crops for industrial use. Out- look on Agriculture, 24: 85-89.
  • 2Bledzki AK, Gassan J. 1999. Composites reinforced with cellulose based fibers. Progress in Polymer Science, 24:221-275.
  • 3Bledzki AK, Reihmane S, Gassan J. 1996. Properties and modification meth- ods for vegetable fibers for natural fiber composites. Journal Applied Polymer Science, 59: 1329-1336.
  • 4Chattopadhyay H, Sarkar PB. 1946. A New ,Method for the Estimation of Cellulose. Proceedings of the National Institute of Sciences of India, 12: 23-46.
  • 5Das M, Chakraborty D. 2008. Evaluation of improvement of physical and mechanical properties of bamboo fibers due to alkali treatment. Journal of Applied Polymer Science, 107: 522-527.
  • 6Doyle CD. 1985. Thermogravimetric Analysis, In: H.F. Mark, N.M. Bikales, C.G. Overberger, G. Menges and J.I. Kroschwitz (eds), Encyclopedia of Polymer Science and Engineering. New York: Wiley Interscience Publish- ers, pp. 1-41.
  • 7Gassan J, Bledzki AK. 1997. The influence of fiber-surface treatment on the mechanical properties ofjute-polypropylene composites. Composites." Part A, 28: 1001-1005.
  • 8Gassan J, Bledzki AK. 1999. Alkali treatment of jute fibers: Relationship between structure and mechanical properties. Journal of Applied Polymer Science, 71: 623-629.
  • 9George J, Bhagawan SS, Thomas S. 1998. Improved interactions in chemi- cally modified pineapple leaf fiber reinforced polyethylene composites. Composite Interfaces, 5: 201-223.
  • 10Ghasemi I, Azizi H, Naeimian N. 2008. Rheological behaviour of polypropyl- ene/kenaf fibre/wood flour hybrid composite. Iranian Polymer Journal 17: 191-198.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部