期刊文献+

硼酸镁晶须应用研究新进展 被引量:3

New Progress in Research on Application of Magnesium Borate Whisker
原文传递
导出
摘要 硼酸镁晶须是继硼酸铝晶须后的又一高性能低成本的晶须,其原料广,具有成本低廉、良好的机械强度和电绝缘性以及无毒无害无污染等优异性能,可作为增强增韧材料添加到其他材料中,是一种应用前景广阔的晶须材料。随着社会对轻质、高效材料的需求越来越大,以及对硼酸镁晶须理论问题的不断深入研究和制备技术的不断开发与完善,可以预见,硼酸镁晶须产品将会展现出极为广阔的应用前景。综述了硼酸镁晶须表面改性问题及其做为填充材料增强金属、树脂、陶瓷等的应用。 The magnesium borate whisker is a high performance and low cost whisker following the aluminum borate whisker. It has large sources of raw materials, low cost, good mechanical strength and electrical insulation as well as non-toxic, pollution-free and other excellent properties which can be used as a reinforcing material to be added to other materials, and it is a whisker material of vast application prospect. Along with the more and more demands of the society for the light-weight and high-performance materials, the further study on the principle of magnesium borate whisker and the continuous development and improvement of preparation technology, it is predicted that the magnesium borate whisker products will exhibit a very broad appheation prospects. The surface modification of magnesium borate whisker is reviewed, as well as its applications in reinforcing metal, resin and ceramic as a filler material.
出处 《化学与粘合》 CAS 2012年第5期75-78,共4页 Chemistry and Adhesion
关键词 硼酸镁晶须 表面处理 应用 Magnesium borate whisker surface treatment application
  • 相关文献

参考文献13

二级参考文献77

共引文献147

同被引文献27

  • 1黄明华,王浩伟.氧化铝短纤维增强铝基复合材料的蠕变破坏行为[J].复合材料学报,2004,21(5):7-10. 被引量:9
  • 2胡明,费维栋.非连续增强金属基复合材料的热残余应力[J].宇航材料工艺,2005,35(1):15-19. 被引量:6
  • 3Jiang C H, Wu J S, Wang D Z. Relaxation of residual stress 20% SiCw/6061 AI composite asextruded at high temperature. Transactions of Nonferrous Metals Society of China, 2001, 11 (5) : 729 - 732.
  • 4Dong S L, Mao J F, Yang D Z, et al. Age-hardening behavior of a SiCw/AI-Li-Cu-Mg-Zr composite. Materials Science and Engineer A, 2002, 327:213 -223.
  • 5Tamer O, Erol K, Orhan C. Investigation of mechanical and machinability properties of SiC particle reinforced A1-MMC. Journal of Materials Processing Technology, 2008, 98 : 220 - 225.
  • 6Amigo V, Ortiz J L, Salvador M D. Microstructure and mechanicalbehavior of 6061A1 reinforced with silicon nitride particles, processed by powder metallurgy. Scripta Materialia, 2000, 42(4) : 383 - 388.
  • 7Chawla N, Chawla K K. Metal matrix composites. New York: Springer, 2006.
  • 8Kim W J, Lee Y S, An C W. Superplastic behavior of PM SiCp/ 6061 aluminum alloy composites at high strain rates. Metal and Materials International, 2002, 8 ( 1 ) : 37 - 44.
  • 9Mohammad J D, Behtash M, Sheida S R, et al. Deformation rate effect on the microstructure and mechanical properties of A1-SiCp composites consolidated by hot extrusion. Materials Science and Engineering A, 2012, 556:23-30.
  • 10JIANG C H,WU J S,WANG D Z. Relaxation of residual stress 20SiCw/6061AI composite as extruded at high temperature [J]. Trans Nonferrous Met Soc China, 2001,11 (5) : 729-732.

引证文献3

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部