期刊文献+

含脱层复合材料连接件的挤压强度试验研究 被引量:9

Experimental Study on Bearing Strength of Composite Joints with Delamination
下载PDF
导出
摘要 脱层是复合材料层板结构中的主要缺陷形式之一 ,它的存在会造成脱层的局部屈曲和扩展 ,从而降低结构的强度和刚度。本工作对含脱层的复合材料螺栓连接件在静载、疲劳载荷和湿热环境载荷的作用下进行了试验研究。测定了含脱层的复合材料连接件的局部失稳载荷、挤压强度和疲劳寿命数值 ,探讨了脱层尺寸对局部失稳载荷、挤压强度和疲劳寿命的影响大小 ,给出了疲劳寿命和脱层直径的函数曲线。探讨了含脱层的复合材料连接件在湿热环境下的强度和刚度数值的变化。 Delamination is one of the most frequently encountered types in structures of composite laminates Local buckling and growth of delaminated laminates will decrease the strength and stiffness In this paper, experiments are performed on composite bolted joints embedded delamination under static loads, fatigue loads and loads on hygrothermal condition The loads of local instability, bearing strength and fatigue life of composite joints embedded delamination are measured and the effects of delamination sizes on them are discussed The fatigue life vs delamination size curve is given from the experimental data The changes of strength and stiffness of joints under hygrothermal condition are discussed
作者 李跃宇
出处 《机械工程材料》 CAS CSCD 北大核心 2000年第4期4-7,17,共5页 Materials For Mechanical Engineering
  • 相关文献

参考文献8

  • 1贾普荣,第九届全国复合材料学术会议论文集,1996年,495页
  • 2贾普荣,第九届全国复合材料学术会议论文集,1996年,500页
  • 3汪 海,第九届全国复合材料学术会议论文集,1996年,472页
  • 4张开达,第九届全国复合材料学术会议论文集,1996年,489页
  • 5中国航空研究院,复合材料连接手册,1994年,56页
  • 6霍金斯 C B,复合材料原理及其应用,1992年,117页
  • 7薛克兴,复合材料结构连接件设计与强度,1988年,208页
  • 8杨炳章,复合材料学报,1987年,4卷,1期,53页

同被引文献84

引证文献9

二级引证文献38

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部