基于FPGA的高速采样缓存系统的设计与实现

Design and implementation of high-speed sampling buffer system based on FPGA

为了提高高速数据采集系统的实时性,提出一种基于FPGA+DSP的嵌入式通用硬件结构。在该结构中,利用FPGA设计一种新型的高速采样缓存器作为高速A/D和高性能DSP之间数据通道,实现高速数据流的分流和降速。高速采样缓存器采用QuartusⅡ9.0软件提供的软核双时钟FIFO构成乒乓操作结构,在DSP的外部存储器接口(EMIFA)接口的控制下,完成高速A/D的数据流的写入和读出。测试结果表明:在读写时钟相差较大的情况下,高速采样缓存器可以节省读取A/D采样数据时间,为DSP提供充足的信号处理时间,提高了整个系统的实时性能。

An embedded general-purpose hardware structure based on FPGA ＋ DSP was proposed in order to improve the real-time performance of the high-speed data acquisition system.In the structure,a new high speed sampling buffer as the data channel between the high-speed A/D and DSP was designed in FPGA and was used to realize the diversion and deceleration of high-speed data stream.The high-speed sampling buffer was based on the ping-pong operation structure of soft-core dual-clock First In First Out（FIFO） provided by Quartus Ⅱ 9.0.Under the control of the External Memory Interface A（EMIFA） interface of the DSP,it completed write-and-read operations of high-speed A/D data streams.The test results indicate that： in the case of large difference between the value of the read-and-write clock,high speed sampling buffer can save the time of the A/D sampling data to provide sufficient signal processing time for DSP,so the real-time performance of the entire system is improved.