期刊文献+

不完全信息环境下的企业价格竞争研究 被引量:14

EXPERIMENTAL STUDY ON CONNECTION PROPERTY OF JOINTS OF PULLEY-CLIP SUPPORTING FRAME
原文传递
导出
摘要 在经典价格竞争模型-伯川德模型的基础上,采用演化博弈理论和方法研究不完全信息条件下企业价格竞争的发生机理。结果表明:产品消费者价格敏感度、企业降价幅度及降价企业的类型都约束着激烈价格竞争的发生;较多企业在不进行价格合谋的条件下,可以自发演化为价格不变,从而从不完全信息的角度解决了伯川德悖论,揭示了企业价格竞争的内在机理。 It Was designed an experiment on semi-rigid horizontal force joints of pulley-dip supporting frame through three groups of specimens. By the analysis of experimental phenomena and data as well as the comparisons with joints rigidity of steel tubular scaffolding, following conclusions were obtained : the joints of pulley-clip supporting frame are typical semi-rigid connections, its semi-rigidity is little affected by the different erection distances; the fluctuation of initial connection stiffness of joints is slightly large, when the joint moment is lower than the 20 percent of the control moment; but with over 20 percent of the control moment, the connection stiffness tends towards to be steady; the connection stiffness of the three groups of specimens is equivalent to that of steel tubular scaffolding with tightening torque of 40 N.m, and the stability and erection quality of pulley-clip supporting frame is better than the traditional steel tubular scaffolding.
机构地区 长沙理工大学
出处 《工业建筑》 CSCD 北大核心 2012年第10期101-107,共7页 Industrial Construction
基金 教育部人文社科基金资助项目(12YJCZH226) 西安邮电学院中青年基金资助项目(1040403 1040401)
关键词 不完全信息 价格竞争 伯川德悖论 演化博弈 pulley-cllp supporting frame connection behavior of joints rigidity semi-rigid
  • 相关文献

参考文献7

  • 1胡长明,刘洪亮,曾凡奎,葛召深,尹洪冰.扣件式钢管高大模板支架研究进展[J].工业建筑,2010,40(2):1-6. 被引量:26
  • 2曾凡奎,刘学兵,胡长明,于经,张涛.高大模板支架承受的两种特殊荷载分析[J].青岛农业大学学报(自然科学版),2007,24(4):308-309. 被引量:23
  • 3谢征勋.建筑工程事故分析与论证[M].北京:地震出版社,1996.
  • 4王力争,方东平.中国建筑业事故原因分析及对策 [M].北京:中国水利水电出版社,2007:103.
  • 5European Committee for Standardization. CEN. Eurocode3, Design of Steel Structures, Part 1.8: Design of Joint. prEN 1993-1 - 200[ S].
  • 6郭正兴,陈安英.基于反分析理论的扣件式钢管支模架节点刚度试验研究[c]//中国建筑学会施工学术委员会模板与脚手架专业委员会2007年会论文汇编.北京:模板与脚手架专业委员会,2007:25-34.
  • 7袁雪霞,金伟良,鲁征,刘鑫,陈天民.扣件式钢管支模架稳定承载能力研究[J].土木工程学报,2006,39(5):43-50. 被引量:122

二级参考文献50

  • 1赵挺生,王泽辉,顾祥林.基于统计的模板支撑设计参数[J].施工技术,2005,34(3):49-50. 被引量:6
  • 2肖备,王建宏,谢建民.Φ48钢管扣件式支模架与脚手架倒塌事故分析[J].建筑安全,2006,21(2):59-62. 被引量:7
  • 3袁雪霞,金伟良,刘鑫,鲁征,陈天民.扣件式钢管模板支撑方案的模糊风险分析模型[J].浙江大学学报(工学版),2006,40(8):1371-1376. 被引量:15
  • 4赵滇生,田兴长,章雪峰,周铁峰.扣件式钢管模板高支撑架整体稳定分析[J].浙江工业大学学报,2007,35(1):78-81. 被引量:35
  • 5Lightfoot E, Oliveto G. Collapse Strength of Tubular Steel Scaffold Assemblies [ J]. Proceedings of the Institution of Civil Engineers (London). Part 1 - Design & Construction, 1977,63 ( 2 ) : 311 - 329.
  • 6Huang Y L, Chen H J, Rosowsky D V, et al. Load-Carrying Capacities and Failure Modes of Scaffold-Shoring Systems,Part Ⅰ : Modeling and Experiment [ J]. Structural Engineering and Mechanics,2000,10 (1) :53 - 66.
  • 7Huang Y L,Kao Y G, Rosowsky D V. Load-Carrying Capacities and Failure Modes of Scaffold-Shoring Systems, Part Ⅱ: An Analytical Model and Its Closed-Form Solution [J]. Structural Engineering and Mechanics ,2000,10 (1) :67 - 79.
  • 8Yue F, Yuan Y, Li G Q. Wind Load on Integral-Lift Scaffolds for Tall Building Construction [ J]. Journal of Structural Engineering, ASCE ,2005,131 (5) :816 - 824.
  • 9Jamshid Mohammadi, Amir Zamani Heydari. Seismic and Wind Load Considerations for Temporary Structures [J]. Practice Periodical on Structural Design and Construction, ASCE,2008,13 (3) :128 -134.
  • 10胡长明,沈勤,曾凡奎,等.高大模板扣件式支撑体系施工技术研究报告[R],西安:西安建筑科技大学,2008.

共引文献163

同被引文献56

引证文献14

二级引证文献35

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部