期刊文献+

差压仪测定活性污泥中异养菌产率系数的研究 被引量:2

Determination of Heterotrophic Bacteria Yield Coefficient in Activated Sludge with Manometric Respirometer
原文传递
导出
摘要 采用在差压瓶内密闭投加有机物的方法,测定污泥混合液中异养菌降解有机物醋酸钠的耗氧量;根据活性污泥数学模型ASM1,利用得到的耗氧量计算异养菌产率系数(YH)。以5个城市污水处理厂以及实验室小试装置中的曝气池混合液为研究对象,先后两次投加NaAc。第1次投加有机物后得到的6个样品的YH平均值为(0.71±0.02)g细胞COD/g氧化COD,第2次投加后得到的YH平均值为(0.68±0.02)g细胞COD/g氧化COD。该方法可对接近活性污泥原位运行状态下的YH值进行方便快捷的测定与计算,结果稳定、重现性好。 A method of adding sodium acetate into a sealed manometric respirometer was used to determine the oxygen consumption for the degradation of sodium acetate by heterotrophic bacteria in sludge mixture. Based on the activated sludge model No. 1 ( ASM1 ), the heterotrophic bacteria yield coefficient (YH) was calculated using the oxygen consumption. Sodium acetate was added twice into the mixed liquors inside aeration tanks at five WWTPs and a small laboratory apparatus. The average YH of six samples was (0.71 ±0.02) g cell COD/g COD oxidized after first addition, and (0.68 ±0.02) g cell COD/g COD oxidized after second addition. The method could quickly determine YH of in-situ activa- ted sludge, with stable result and good repeatability.
出处 《中国给水排水》 CAS CSCD 北大核心 2012年第21期113-116,共4页 China Water & Wastewater
基金 中国矿业大学科技基金资助项目(OP080268)
关键词 差压仪 ASM1模型 异养菌产率系数 耗氧量 manometric respirometer ASM1 model heterotrophic bacteria yield coefficient oxygen consumption
  • 相关文献

参考文献11

二级参考文献41

  • 1宋文清,杨海真.活性污泥数学模型中异养菌产率系数的测定[J].环境污染与防治,2004,26(4):253-255. 被引量:12
  • 2于静洁,马超,李莉,顾国维,张志峰.ASM1中化学计量系数与动力学参数的测定[J].环境污染与防治,2006,28(5):334-336. 被引量:9
  • 3黄勇,杨铨大,王宝贞,聂梅生.生物处理动力学参数测定研究[J].中国环境科学,1996,16(2):123-127. 被引量:20
  • 4卢培利,张代钧,张欣,龙腾锐.自动混合呼吸测量仪的开发与验证[J].环境工程学报,2007,1(5):118-123. 被引量:12
  • 5SIN G, VANHULLE S W H, DE PAUW D J W, et al. A critical comparison of systematic calibration protocols for activated sludge models: a SWOT analysis [J]. War Res, 2005, 39: 2489-2474.
  • 6PETERSEN B, GERNAEY K, DEVISSCHERA M, et al. A simplified method to assess structurally identifiable parameters in monod-based activated sludge models[J].Wat Res, 2003, 37: 2893-2904.
  • 7DE PAUW D J W, SIN G, INSEL G, et al. Discussion of "assessing parameter identifiability of activated sludge model No. 1" by pedro afonso and maria da conceicao cunha[J]. J Environ Eng, 2004, 130:110- 112.
  • 8GUJER W. Activated sludge modeling: past, present and future[J]. Wat Sci Technol, 2006, 53(3): 111-119.
  • 9PETERSEN B, GERNAEY K, HENZE M, et al.Calibration of activated sludge models: a critical review of experimental designs[C]//Biotechnology for the Environment: Wastewater Treatment and Modeling, Waste Gas Handling. Netherlands: Kluwer Academic Publishers, 2003 : 101-186.
  • 10INSEL G, SIN G, LEE D S, et al. A calibration methodology and model-based system analysis for nutrient removing SBRs under reduced aeration[J].J Chem Tech Biotech, 2006, 81(4):679-687.

共引文献33

同被引文献30

引证文献2

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部