摘要
在苯乙烯-丁二烯-苯乙烯三嵌段共聚物(SBS)中添加马来酸酐化聚丁二烯(MLPB)和胺化环氧丁二烯(LCP)可以适当提高胶粘剂的力学性能,其得到的最大拉伸强度分别为2.671MPa和8.652MPa。研究结果表明,温度以及添加胺化LCP和MLPB可以促进胶粘剂中互穿聚合物网络的形成,提高胶粘剂的强度。
The maleated polybutadiene （ MLPB ） and amination epoxy butadiene （ LCP ） was added to Styrene - butadiene - styrene three block copolymer （ SBS ）,which could improve the mechanical properties of the adhesive, whose maximum tensile strength were 2.671MPa and 8.652MPa. Results show that temperature and LCP and MLPB can promote network formation of adhesive and improve the adhesive strength.
出处
《重庆电子工程职业学院学报》
2012年第4期159-161,共3页
Journal of Chongqing College of Electronic Engineering
关键词
SBS热塑性弹性体
胶粘剂改性
固化工艺
拉伸强度
SBS thermoplastic elastomeric
modified adhesive
solidification process
tensile strength
