期刊文献+

基于解域的四精确点球面4R机构函数综合 被引量:10

Spherical 4R Function Synthesis Based on Solution Regions for Four Precision Points
下载PDF
导出
摘要 提出了一种基于解域的四精确点球面4R机构函数综合方法。首先通过相对运动转换将函数综合转换为位置综合。接着给出了球面布氏曲线的方程式及布氏点的计算和分类方法。最后通过具体的示例建立了机构类型解域,将无穷多机构解表示在有限的环形区域内,从而使设计者能够直观准确地了解机构的类型及其分布区间。 A synthesis approach was introduced for spherical 4R function generator of four precision points. Firstly, the spherical 4R function synthesis was converted to motion generation synthesis by employing an inversion method. The equations of spherical Burmester curves were derived. The calculation and classification of Burmester points were introduced. Then mechanism types of an infinite number of solutions are expressed on finite circle solution regions with illustrative examples.
出处 《农业机械学报》 EI CAS CSCD 北大核心 2012年第10期200-206,共7页 Transactions of the Chinese Society for Agricultural Machinery
基金 国家自然科学基金资助项目(50975024) 北京市自然科学基金资助项目(3102021)
关键词 球面机构 函数综合 四精确点 解域 Spherical mechanism, Function synthesis, Four precision points, Solution regions
  • 相关文献

参考文献15

  • 1Chiang C H. Synthesis of spherical four-bar function generators by means of three relative poles[J]. Mechanism and Machine Theory, 1976, 11(4):285-294.
  • 2Chiang C H. Design of spherical and planar crank-rockers and double-rockers as function generators-I crank rockers [ J ]. Mechanism and Machine Theory, 1986, 21(4) : 287 -296.
  • 3Chiang C H. Design of spherical and planar crank-rockers and double-rockers as function generators-II double-rockers [ J ]. Mechanism and Machine Theory, 1986, 21(4) : 297 -305.
  • 4Chiang C H. Kinematics of spherical mechanisms[ M]. New York: Cambridge University Press, 1988.
  • 5Cervantes-S6nchez J J, Medellfn-Castillo H I. Some improvements on the exact kinematic synthesis of spherical 4R function generators[J]. Mechanism and Machine Theory, 2009, 44( 1 ) : 103 - 121.
  • 6Cervantes-Sanchez J J, Luis Gracia. A novel and efficient kinematic synthesis approach of the spherical 4R function generator for five and six precision points[J]. Mechanism and Machine Theory, 2009, 44 (11 ) : 2 020 -2 037.
  • 7Rasim I Alizade, 0zgiir Kilit. Analytical synthesis of function generating spherical four-bar mechanism for the five precision points [J]. Mechanism and Machine Theory, 2005, 40 (7) : 863 - 878.
  • 8王德伦,王淑芬,张保印.球面四杆机构近似函数综合的自适应方法[J].机械工程学报,2004,40(2):45-49. 被引量:15
  • 9褚金奎,孙建伟.球面四杆机构函数综合的傅立叶级数法[J].机械科学与技术,2008,27(7):848-852. 被引量:6
  • 10Michael Mccarthy J. Geometric design of linkages[ M ]. New York: Springer-Verlag, 2000.

二级参考文献15

共引文献21

同被引文献93

  • 1ZHAO Yong,CHEN Genliang,WANG Hao,LIN Zhongqin.Optimum Selection of Mechanism Type for Heavy Manipulators Based on Particle Swarm Optimization Method[J].Chinese Journal of Mechanical Engineering,2013,26(4):763-770. 被引量:3
  • 2杨玉虎,洪振宇,张策.机构位置误差分析的传递矩阵法[J].机械工程学报,2005,41(2):20-23. 被引量:32
  • 3吴鑫,宋磊,邓瑞涛.基于网络的平面连杆机构函数综合优化设计[J].农业机械学报,2005,36(2):108-111. 被引量:5
  • 4张均富,徐礼钜,王进戈.基于混沌计算的可调球面四杆机构轨迹综合[J].机械科学与技术,2007,26(2):172-176. 被引量:8
  • 5褚金奎,孙建伟.连杆机构尺度综合的谐波特征参数法[M].北京:科学出版社,2010:238-241.
  • 6Yi Gu, Weng Xinhua. Kinematic design of a radius-variable gripper with 1-DOF used in high-vohage hot-line cleaning robot[ J]. International Journal of Advanced Robotic Systems, 2008,5 (1) : 107 -114.
  • 7Eric T W, David J R. Single degree-of-freedom exoskeleton mechanism design for finger rehabilitation [ C ] // 2011 IEEE International Conference on Rehabilitation Robotics, 2011.
  • 8A1-Araidah O, Batayneh W. Conceptual design of single DOF human-link eight-bar leg mechanism [ J ]. Jordan Journal of Mechanical and Industrial Engineering, 2011, 5 (4) :285 - 289.
  • 9Daniel G, Christine Q W. Design and optimization of an eight-bar legged walking mechanism imitating a kinetic sculpture Wind Beast[ J]. Transactions of the Canadian Society for Mechanical Engineering, 2012, 36(4) :343 -355.
  • 10Gim S S, Ying Fangtian. Dimensional synthesis of planar eight-bar linkages based on a parallel robot with a prismatic base joint [ C] //Proceedings of the ASME International Design Engineering Technical Conference & Computers and Information in Engineering Conference, 2013 : V06AT07A051.

引证文献10

二级引证文献39

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部