3Rodriguez A R. Morphing aircraft technology survey [R]. Nevada:45th AIAA Aerospace Science Meeting and Exhibit, 2007.
4Kudva J N, Sanders B, Pinkerton- Florance J,Garcia,E.Overview of the DAPA/ AFRL/NASA smart wing phase 2 program[C]//Smart structure and materials 2001: Industrial and commercial applications of smart structures technologies. 2001:383-389.
5Ramrkahyni D S, Lesieutre G A, Frecker M, Bharti S. Aircraft structural morphing using tendon actuated compliant cellular trusses [R]. Califomia: 45th AIAA/ASME/AHS/ ASC Structures, Structural Dynamics & Materials Conference, 2004.
6Perking D A, Reed J L, Havens J E. Morphing wing structure for loitering air vehicles[R]. California: 45th AIAA/ASME/AHS/ASC Structures, Structural Dynamics & Materials Conference, 2004.
7Wlezien R W, Homer G C, Mc Gowan A R, Padula S L, Scott M A, Silcox R J, Simpson J O. The aircraft morphing program[R]. AIAA 98- 1927.
8Anderson EH, Lindler J E, Regelbrugge M E. Smart material actuator with long stroke and high power output[R].43th AIAA/ ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, 2002.
二级参考文献12
1Weisshaar T A. Morphing aircraft technology-new shapes for aircraft design[C] ff Multifunctional Structures/ Integration of Sensors and Antennas. Meeting Proceedings RTO MP AVT 141. 2006.
2SoflaAY N, MeguidSA, TanK T, et al. Shapemorphing of aircraft wing: status and challenges[J]. Materials and Design, 2010, 31(3): 1284-1292.
3Monner H P, Sachau D, Breitbach E. Development and design of flexible fowler flaps for an adaptive wing[C]// Proceedings of SPIE. 1998, 3326: 60-70.
4Monner H P. Realization of an optimized wing camber by using form variable flap structures[J]. Aerospace Seienee Technology, 2001, 5 (7): 445-455.
5Poonsong P. Design and analysis of a multi-section variable camber wing[D]. Maryland: University of Maryland, 2004.
6Sofia A Y N, Elzey D M, Wadley H N G. Cyclic degradation of antagonistic shape memory actuated structures [J]. Smart Material Structure, 2008, 17(2) 025014.
7Sofia A Y N, Elzey D M, Wadley H N G. Two-way antagonistic shape actuation based on the one-way shape memory effect[J]. Intelligent Material System Structure 2008, 19(9): 1017 -1027.
8Elzey D M, Sofia A Y N, Wadley H N G. A bio-inspired,high-authority actuator for shape morphing structures[C] //Proceedings of SPIE. 2003, 5053: 92-100.
6Rodriguez A R. Morphing aircraft technology survey. AIAA 2007- 1258,2007.
7Bartley-Cho J D, Wang D P, Martin C A,et al. Development of high- rate , adaptive trailing edge control surface for the smart wing phase 2 wind tunnel model. Intelligent Material System and Structures,2004-; 15:279.
8Kai Yu, Wei longyin, Sun S H, et al. Design and analysis of mor- phing wing based on SMP composite. Proc of SPIE, 7290. USA: SPIE, 2009; 72900S: 1 -8.
