期刊文献+

Friction and wear properties of Cu-based self-lubricating composites in air and vacuum conditions 被引量:3

Friction and wear properties of Cu-based self-lubricating composites in air and vacuum conditions
原文传递
导出
摘要 Cu-based self-lubricating materials containing two different solid lubricants (graphite and MoSs) were fabricated by P/M hot pressing techniques. Physical and mechan- ical properties of the samples were examined. The effects of graphite and MoSs contents on friction coefficient and wear rate were investigated by a ring-on-disc wear machine in air and vacuum conditions, respectively. Tribo-films formed on the worn surfaces were characterized by scanning electron microscopy (SEM) and X-ray photo- electron spectroscopy (XPS). The results indicated that density, hardness and bending strength all increased with the increasing content of MoS2, while the relative density was opposite. Sample B containing 15 vol. pct graphite and 15 vol. pct MoS2 pos- sessed superior tribological properties both in air and vacuum conditions. However, the tribo-films formed on the worn surfaces of the sample B were greatly discrepant in composition at different testing conditions. In air, the volume ratio of MoS2 and graphite in the tribo-films is 0.31:1 whereas the ratio in vacuum is 1.07:1. Cu-based self-lubricating materials containing two different solid lubricants (graphite and MoSs) were fabricated by P/M hot pressing techniques. Physical and mechan- ical properties of the samples were examined. The effects of graphite and MoSs contents on friction coefficient and wear rate were investigated by a ring-on-disc wear machine in air and vacuum conditions, respectively. Tribo-films formed on the worn surfaces were characterized by scanning electron microscopy (SEM) and X-ray photo- electron spectroscopy (XPS). The results indicated that density, hardness and bending strength all increased with the increasing content of MoS2, while the relative density was opposite. Sample B containing 15 vol. pct graphite and 15 vol. pct MoS2 pos- sessed superior tribological properties both in air and vacuum conditions. However, the tribo-films formed on the worn surfaces of the sample B were greatly discrepant in composition at different testing conditions. In air, the volume ratio of MoS2 and graphite in the tribo-films is 0.31:1 whereas the ratio in vacuum is 1.07:1.
出处 《Acta Metallurgica Sinica(English Letters)》 SCIE EI CAS CSCD 2012年第5期391-400,共10页 金属学报(英文版)
基金 financially supported by the Major Research Plan of the National Natural Science Foundation of China (No. 91026018) the National Natural Science Foundation of China (No. 60979017) the Doctoral Fund of Ministry of Education of China (No. 20110111110015)
关键词 Self-lubricating composite Air and vacuum conditions Frictioncoefficient Wear rate Synergistic effect Self-lubricating composite Air and vacuum conditions Frictioncoefficient Wear rate Synergistic effect
  • 相关文献

参考文献26

  • 1D. Coupard, M.C. Castro, J. Coleto, A. Garcia, J. Goffii and J.K. Palacios, Key Eng Mater 127-131 (1996) 1009.
  • 2D. Gultekin, M. Uysal, S. Aslan, M. Alaf, M.O. Guler and H. Akbulut, Wear 270(1) (2010) 73.
  • 3E. Hong, B. Kaplin, T. You, M. Suh, Y. Kim and H. Choe, Wear 270(9-10) (2011) 591.
  • 4H. Wang, W. Wu, F. Wang and D. Yang, Acta Metall Sin (Engl Lett) 27(6) (1991) 444.
  • 5B.A. Krick and W.G. Sawyer, Tribol Lett 41(1) (2011) 303.
  • 6F. Akhlaghi and A. Zaxe-Bidaki, Wear 266(1) (2009) 37.
  • 7R.K. Gautam, S. Ray, S.C. Sharma, S.C. Jain and R. Tyagi, Wear 271(5-6) (2011) 658.
  • 8N.L. McCook, D.L. Burris, P.L. Dickrell and W.G. Sawyer, Tribol Lett 20(2) (2005) 109.
  • 9S.V. Prasad, N.T. McDevitt and J.S. Zabinski, Wear 230(1) (1999) 24.
  • 10S. Dhanasekaran and R. Gnanamoorthy, Mater Design 28(4) (2007) 1135.

同被引文献29

引证文献3

二级引证文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部