摘要
通信是各个系统进行数据交换,资源共享的基本方法。以太网是当今现有局域网采用的最通用的通信协议标准,它可以通过不同的传输媒体,实现各设备间的数据交换。文章在系统硬件基础上,着重研究了通信接口的软件设计,并编写了基于ARM开发板的通信程序。该程序能将传感器采集的数据传输至客户机。
Communication is the basic way to transport and share information between different systems.Ethernet is the basic and common Protocol Standards in the local network.Through the different transport media,Ethernet can realize the communication and connection between different devices.The paper is based on system hardware,focuses on the software design of communication interface,and develops the communication program based on the ARM Development Board.This application can send data which created by sensor to the client.
出处
《实验科学与技术》
2012年第5期42-44,共3页
Experiment Science and Technology
基金
成都理工大学教改项目资助(2009-XJB-47)
关键词
ARM开发板
以太网协议
通信
程序设计
ARM development board
ethernet principle
communication
program design
