期刊文献+

压铸速度对AM60B镁合金组织性能的影响 被引量:1

Effect of die casting speed on microstructure and properties of AM60B magnesium alloy
下载PDF
导出
摘要 采用半固态压铸技术,在固相率为50%左右,压铸(射)速度为3 m/s时,压铸AM60B镁合金试样的抗拉强度达到176 N/mm2。除合金的化学成分外,微观组织和合金相的取向都受工艺条件的显著影响,适宜的工艺参数将得到好的微观组织和合金相取向,从而提高合金的力学性能。在冷室压铸条件下,研究了压铸工艺参数对AM60B镁合金组织和力学性能的影响。 The tensile strength of AM60B magnesium alloy die casting part can reach to 176 N/mm2 while the magnesium allo3/part being produced with semi-solid die casting tech- nology, that means the solid fraction is about 50% and the die casting speed is 3 m/s. In ad- dition to chemical composition, mierostructure and alloy phase orientation are affected by the technological parameters significantly. The suitable process parameters can lead the micro- structure and alloy phase orientation better, therefore the mechanical properties of the alloy can be increased. The effect of casting process parameters on microstructure and mechanical properties of AM60B alloy has been studied systematically using cold chamber die casting process.
出处 《轻合金加工技术》 CAS 北大核心 2012年第11期19-22,共4页 Light Alloy Fabrication Technology
基金 浙江省教育厅2012年科研项目(Y201224343) 浙江机电职业技术学院科研项目(A-2071-12-011) 浙江机电职业技术学院科技孵化基金项目(A-0273-12-001)
关键词 工艺参数 AM60B镁合金 压铸 力学性能 process parameter AM60B magnesium alloy die-casting mechanical property
  • 相关文献

参考文献8

二级参考文献90

  • 1赵鹏,耿浩然,田宪法,崔红卫,耿红霞,刘建同.熔体热速处理对铸造Mg合金组织和力学性能的影响[J].中国有色金属学报,2002,12(z1):241-244. 被引量:19
  • 2闫蕴琪,张廷杰,邓炬,周廉.耐热镁合金的研究现状与发展方向[J].稀有金属材料与工程,2004,33(6):561-565. 被引量:120
  • 3崔忠圻.金属学与热处理[M].北京:机械工业出版社,2001..
  • 4Lee Y C ,Dahle A K,St.lohn D H. Grain refinemenl of magnesium[A]. Magnesium Technilogy 2000[C]. Pennsylvania : TMS ,2000.
  • 5Yano E,Tamura Y, Motegi T ,et al. Effect of carbon powder on grain refinement of an AZ91E magnesium alloy [J].Journal of Japan Institute of Light Metal ,2001 ,51 (11) :599-603.
  • 6JIN Qing-lin ,Eom J P ,Lim S S ,et al. Grain refining mechanism of a carbon addition method in a Mg AI magnesium alloy[J]. Scripta Materialia,2003,,19 (11):1129-1132.
  • 7Tamura Y,Kono N .Motegi T ,et al. Grain refinement of cast Mg-A1 alloys[J].Journal of Japan Institute of Light Metals ,1998,48(8) : 395-399.
  • 8Makoto T ,Suzuki T ,Fukui I ,et al. Effect of Ti or TrB on grain size and mechanical properties of A1-7 %i Si-O.3%Mg casting alloy [J].Journal of Japan Institute of Light Metals, 1979,29(10) :437-444.
  • 9Sasaki H ,Adaclai M ,Sato S ,et al. Effect of solidified microstructures on mechanical properties of AZgl magnesium alloy [J]. Journal of Japan Institute of Light Metals, 1997,47 (3) : 133-138.
  • 10Haitani T .Tamura Y, Yano E , et al. Grain refining mechanism of high-purity Mg-9 % AI alloy ingot and influence of Fe or Mn addition on cast grain size[J]. Journal of Japan Institute of Light Metals,2001,51(8):403-408.

共引文献205

同被引文献23

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部