期刊文献+

叶片密封圆角对密封面接触压力的影响 被引量:3

Study on the Effects of the Fillet of Vane and Vane Seals to Contact Pressure
下载PDF
导出
摘要 建立矩形截面叶片密封的数值模型,研究叶片密封圆角r和叶片圆角R对密封面接触压力的影响。研究结果表明:圆角r和R都会导致密封面接触压力明显降低,增大了密封失效的风险。当叶片密封圆角r较大时,应适度加大预压缩量以增大密封面接触压力。叶片圆角R不应超过临界值,针对具体实例给出了该临界值的计算结果。 A numerical model was built to study the effects of the fillet of vane and vane seals to the contact pressure of flexible windows shape vane seals with rectangular cross section. The computing results show that the fillet of vane and vane seals reduce significantly the contact pressure. So a big initial interference is necessary when there is a big vane seal fillet. Also the fillet of the vane should be limited to avoid too much contact pressure lost, and the fillet limit was gotten aiming at an example.
出处 《机床与液压》 北大核心 2012年第21期51-54,共4页 Machine Tool & Hydraulics
基金 武汉市科技局攻关项目(201110821247) 武汉科技大学绿色制造与节能减排科技研究中心开放基金资助项目(WB008)
关键词 叶片式液压摆动油缸 叶片密封 橡胶密封 接触压力 Hydraulic rotary vane actuator (RVA) Vane seals Elastomeric rubber seal Contact pressure
  • 相关文献

参考文献7

  • 1谢良喜,孔建益,万晓红.矩形截面叶片密封可靠性和机械效率的数值研究[J].润滑与密封,2009,34(7):54-57. 被引量:11
  • 2NIKAS G K, BURRIDGE G, SAYLES R S. Modelling and Optimization of Rotary Vane Seals [ J ]. Proceedings of the Institution of Mechanical Engineers, Part J : Journal of Engi- neering Tribology,2007,221 (6) :699 -715.
  • 3NIKAS G K, SAYLES R S. Modelling and Optimization of Composite Rectangular Reciprocating Seals [ J ]. Proceed- ings of the Institution of Mechanical Engineers, Part J : Jour- nal of Engineering Tribology,2006,220(4) :395 -412.
  • 4NIKAS G K, SAYLES R S. Study of Leakage and Friction of Flexible Seals for Steady Motion via a Numerical Approxi- mation Method[ J ]. Tribology International, 2006,39 ( 9 ) : 921 - 936.
  • 5XIE Liangxi, KONG Jianyi, QIAN Li, et al. Numerical Mod- eling of Contact Pressure in Vane Seals [ C ]//Proceedings of the ASME 2009 International Design Engineering Tech- nical Conferences & Computers and Information in Engi- neering Conference ( IDETC/CIE2009 ) ,2009:819 - 825.
  • 6米勒海因茨K 纳乌伯纳德S 程传庆 译.流体密封技术-原理与应用[M].北京:机械工业出版社,2002..
  • 7陈磊,张银东,纪玉龙,孙玉清.新型双作用变量叶片泵功率特性仿真分析[J].机床与液压,2006,34(11):87-89. 被引量:1

二级参考文献15

  • 1崔若松.转叶式液压舵机若干技术分析[J].上海造船,2007(2):27-28. 被引量:6
  • 2薛晓虎.液压系统缝隙内流体泄漏特性的分析[J].机械工程学报,2004,40(6):75-80. 被引量:37
  • 3高翔,赵金才,王若平,凌智勇.液压助力转向系统的仿真分析[J].江苏大学学报(自然科学版),2003,24(6):34-38. 被引量:23
  • 4Nikas G K.Modelling and optimization of rotary vane seals[J].Proceedings of the Institution of Mechanical Engineers,Part J:Journal of Engineering Tribology,2007,221 (6):699-715.
  • 5Nikas G K,Saylss R S.Study of leakage and friction of flexible seals for steady motion via a numerical approximation method[J].Tribol Int,2006,39 (9):921-936.
  • 6Nikas G K,Sayles R S.Modelling and optimization of composite rectangular reciprocating seals[J].Proc IMechE,Part J:J Engineering Tribology,2006,220 (J4):395-412.
  • 7Nikas G K,Sayles R S.Computational model of tandem rectangular elastomeric seals for reciprocating motion[J].Tribol Int,2006,39 (7):622-634.
  • 8Xie Liangxi.Numerical modeling of contact pressure in vane seals[C].ASME Design Engineering Technical Conference,2009.
  • 9Muller H K,Nau B S.Fluid sealing technology principles and applications[M].Springer,2002.
  • 10[3]Yuji Koazki,Goro Hirose,Shozo Sekiya.Electric Power Steering Motion and Control[J].Dynamic Design Lab,2001(11).

共引文献11

同被引文献17

引证文献3

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部