期刊文献+

锰替代中铬合金铸钢中镍和钼的研究 被引量:6

Study on Manganese as a Substitute for Nickel and Molybdenum in the Medium-Cr Alloy Cast Steel
下载PDF
导出
摘要 以锰作为主要添加元素,替代中铬合金铸钢中贵重合金元素镍和部分钼,并研究了材料的组织、性能及其作用机理。结果表明,替代后材料组织细化,冲击韧度和动态冲击抗磨料磨损性能提高,且生产成本大幅下降。 Precious metals in the medium-Cr alloy cast steel such as nickel and molybdenum were replaced by manganese, the structure and properties of the material and the mechanism of substitute were studied. The results show that the microstructure of the material using manganese was refined, the impact toughness and dynamic impact of anti-abrasion performance were improved, and the cost of the alloy steel was greatly decreased.
出处 《铸造》 CAS CSCD 北大核心 2012年第11期1286-1290,共5页 Foundry
基金 广东省科技计划项目(2010A080407002 2011A091000035 2011B090600013)
关键词 合金铸钢 力学性能 耐磨性 manganese alloy cast steel nickel molybdenum mechanical properties wear resistance
  • 相关文献

参考文献5

  • 1赵四勇,林怀涛,曾耀东,陆金才,常哲传.筒式磨煤机磨球与衬板的配副性研究[J].华电技术,1993,26(6):51-55. 被引量:6
  • 2Zhao S Y, Lin H T, Zeng Y D, et al. The optimal mating of balls and lining plates in ball mills [J]. Wear, 1994, 178 (1-2) : 79- 84.
  • 3李卫.球磨机磨球与衬板的选材及其匹配系统的试验研究[C]//中国金属学会耐磨材料学术委员会全国磨球与衬板学术会议,1995.
  • 4孙珍宝,朱谱藩,林慧国.合金钢手册:上册[M].北京:冶金工业出版社,1984.
  • 5三种Fe-4Cr-C合金钢正火-回火组织的电镜分析[R].广州有色金属研究院内部研究报告.

共引文献5

同被引文献32

  • 1符寒光,陈祥,李言祥.高硅耐磨铸钢的研究进展[J].钢铁研究,2005,33(1):59-63. 被引量:4
  • 2钱余海,李自刚.加速腐蚀环境下高强耐候钢Q450NQR1的耐蚀性能研究[J].宝钢技术,2007(2):5-8. 被引量:24
  • 3谭谆礼,白秉哲,方鸿生.Mo在新型空冷低碳Mn-Si-Cr系贝氏体钢中的作用[J].金属热处理,2007,32(9):48-51. 被引量:16
  • 4李海龙.高锰钢性能的研究和提髙[D/OL].中国优秀硕士学位论文全文数据库,2008: 7-10[2008-04-28]. http://www. cnki. net/KCMS/detail/detail,aspx.
  • 5Z Qianxue,H Haie,L Jian-hua. Effect of alloyingelements Ti and Nb on microstructure and perform-ance of 3, 5Ni steel [J],Advanced Materials Re-search, 2012 (6):717-721.
  • 6J. Calvo,I.-H. Jung,A.M. Elwazri,D. Bai,S. Yue.Influence of the chemical composition on transformation behaviour of low carbon microalloyed steels[J]. Materials Science & Engineering A . 2009 (1)
  • 7E.J. Pavlina,C.J. Tyne.Correlation of Yield Strength and Tensile Strength with Hardness for Steels[J]. Journal of Materials Engineering and Performance . 2008 (6)
  • 8Reidar Bjorhovde.Development and use of high performance steel[J]. Journal of Constructional Steel Research . 2003 (3)
  • 9C Miki,K Homma,T Tominaga.High strength and high performance steels and their use in bridge structures[J]. Journal of Constructional Steel Research . 2002 (1)
  • 10Focht E M.Ultra low carbon bainitic weathering steel. U.S.Patent6315946 . 2001

引证文献6

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部