摘要
以不同含量玻璃纤维(GF)增强改性高流动性及线型尼龙(PA)6,研究了其性能。结果表明,GF增强高流动性PA6材料的熔体流动性明显高于GF增强线型PA6材料,尤其当GF质量分数为50%～60%时,GF增强高流动性PA6材料仍然具有良好的表面性能,综合力学性能明显优于GF增强线型PA6材料。
High flow nylon 6 and linear nylon 6 were reinforced by glass fiber（GF） with different content, and their properties were researched. The results showed that the melt flow index of high flow nylon 6 was higher than that of linear nylon 6. Especially, when the mass fraction of GF was 50%-60% GF reinforced high flow nylon 6 still had a good surface appearance and performance, and its mechanical properties significantly was better than that of GF reinforced linear nylon 6.
出处
《工程塑料应用》
CAS
CSCD
北大核心
2012年第12期28-31,共4页
Engineering Plastics Application
关键词
尼龙6
玻璃纤维
增强
nylon 6
glass fiber
reinforce
