期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

ASME规范关于碳钢和低合金钢钢板拉伸试验的若干规定

Requirements for Tensile Test of Carbon and Low Alloy Steel Plates in ASME Code
下载PDF
导出
摘要 现代钢板生产技术的特点是熔炼炉的容积小和广泛采用连铸技术。ASME规范关于碳钢和低合金钢钢板拉伸试验的某些规定,尤其是取样数量,与这种生产方式有关。 The modern production of steel plates is characterized by using melting furnaces with small volume capacity and adopting continuous casting technology largely. Requirements specified in ASME code for tensile test, especially on number of the samples, are in the way of this production mode.
作者 李可新 张丽 于美娜 郭晶
机构地区 大连日立机械设备有限公司
出处 《化工装备技术》 CAS 2012年第6期13-20,共8页 Chemical Equipment Technology
关键词 钢板 碳钢 低合金钢 拉伸试验 单元坯一次轧制量 ASME规范 Steel plates Carbon steel Low alloy steel Tension test Plate-as-rolled ASME code
分类号 TG115.5 [金属学及工艺—物理冶金]
  • 相关文献

参考文献10

  • 1SA-20/SA-20M. Specification for General Requirements for Steel Plates for Pressure Vessels, ASME Code, Section II, Part A [S] . 2010 Edition with 2011 Addenda: 83- 123.
  • 2SA-941. Specification for Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys, ASME Code, Section II, Part A [S] . 2010 Edition with 2011 Addenda:1483-1490. ASME Code, Section II, Part A [S] . 2010 Edition with 2011 Addenda:1483-1490.
  • 3SA-387/SA-387M. Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum, ASME Code, Section II, Part A [S] .2010 Edition with 2011 Addenda: 695 -702.
  • 4ASME锅炉压力容器规范,国际性规范,Ⅱ,A篇,铁基材料[S].2010版.北京:中国石化出版社,2010.
  • 5SA-353/SA-353M. Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9- Ni% Nickel, ASME Code, Section II, Part A [S] . 2010 Edition with 2011 Addenda: 591-595.
  • 6SA-841/SA-841M. Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP) , ASME Code, Section II, Part A [S] . 2010 Edition with 2011 Addenda: 1467-1476.
  • 7SA-370/SA-370M. Test Methods and Definitions for Mechanical Testing of Steel Products, ASME Code, Section II, Part A [S] . 2010 Edition with 2011 Addenda: 621-678.
  • 8SA-788/SA-788M. Specification for Steel Forgings, General Requirements, ASME Code, Section II, Part A [S] . 2010 Edition with 2011 Addenda: 1377-1391.
  • 9SA-962/SA-962M. Specification for Common Require- ments for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range, ASME Code, Section II, Part A [S] . 2010 Edition with 2011 Addenda: 1515-1527.
  • 10SA-484/SA-484M. Specification for General Require- ments for Stainless Steel Bars, Billets, and Forgings, ASME Code, Section II, Part A [S] . 2010 Edition with 2011 Addenda: 869-884.
化工装备技术
2012年 第6期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部