期刊文献+

双圆弧弧齿锥齿轮动态特性试验研究

Double Circular Arc Spiral Bevel Gear Test and Research on Dynamic Characteristics
下载PDF
导出
摘要 探讨双圆弧弧齿锥齿轮应用到重载商用卡车单级桥中,作为主流格里森弧齿锥齿轮的有效补充的可能性,提出试验方案并搭建试验台,通过格里森弧齿锥齿轮和双圆弧弧齿锥齿轮的动态特性对比试验,利用Matlab中的小波和小波包分析法对试验数据进行分析比较,得到了双圆弧弧齿锥齿轮的动态特性。 The possibility of double circular arc spiral bevel gear applying to heavy commercial trucks single bridge, as the mainstream of Gleason spiral bevel gears effectively added is discussed. The test plan is put forward and a test platform is built, through the Gleason spiral bevel gear with double circular arc spiral bevel gear dynamic charac- teristics contrast test, by the using of the wavelet and wavelet packet analysis method in Matlab, the experimental data is analyzed, the dynamic characteristic of double circular arc spiral bevel gear is obtained.
出处 《机械传动》 CSCD 北大核心 2012年第12期44-47,59,共5页 Journal of Mechanical Transmission
关键词 双圆弧弧齿锥齿轮 格里森弧齿锥齿轮 动态特性 信号分析 Double circular arc spiral bevel gear Gleason system of spiral bevel gear Dynamic characteris-tic Signal analysis
  • 相关文献

参考文献5

二级参考文献17

  • 1王铁,邵家辉,陈永康.超短齿硬齿面双圆弧齿轮传动的强度计算和应用[J].机械传动,1993,17(3):12-15. 被引量:2
  • 2吴序堂,王小椿,李锋.曲线齿锥齿轮三阶接触分析法的原理及传动质量评价[J].机械工程学报,1994,30(3):47-54. 被引量:14
  • 3方宗德.准双曲面齿轮传动的动载荷计算[J].汽车工程,1994,16(2):92-97. 被引量:9
  • 4汪中厚,周晓玲.螺旋锥齿轮动力学研究方法及进展[J].中国机械工程,2006,17(11):1203-1208. 被引量:26
  • 5Litvin F.L., Gutman Y. A Method of Local Synthesis of Gears Grounded on the Connection Between the Principal and Geodetic Curvatures of Surfaces[J]. ASME Journal of Mechanical Design, 1981 , 103 : 114 - 125.
  • 6朱景梓,邵家辉,李进宝.双圆弧弧齿锥齿轮啮合原理及其设计制造[R].太原工学院齿轮研究室,1982.
  • 7Sugimoto M, Maruyama N. Effect of tooth contact and gear dimensions on transmission errors of loaded hypoid gears[J]. Transactions of the ASME, Journal of Mechanical Design, 1991, 113:182 - 187.
  • 8F.L.Litvin,J. S.Chen,J. Lu, et al. Application of Finlte Element Analysis for Determination of load Share, Real Contact Ratio, Precision of Motion,an Stress Analysis[J]. ASME Journal of Mechanical Design, 1996, 118(4) :561 - 567.
  • 9Falah B, Gosselin C, Cloutier L. Experimental and Numerical investigation of the Meshing Cycle Ratio in Spiral Bevel Gears [ J ]. Mesh Mach Theory, 1998, 33(1/2) :21 - 37.
  • 10李进宝 邵家辉 王铁.双圆弧圆锥圆柱齿轮减速机试验研究.中国机械工程,1994,(5):42-43.

共引文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部