期刊文献+

Superplastic Behavior of Reciprocating Extruded Mg-6Zn-1Y-0.6Ce-0.6Zr from Rapidly Solidified Ribbons

Superplastic Behavior of Reciprocating Extruded Mg-6Zn-1Y-0.6Ce-0.6Zr from Rapidly Solidified Ribbons
下载PDF
导出
摘要 RRE-Mg66 alloy with a composition of Mg-6.0%Zn-1.0%Y-0.6%Ce-0.6Zr was prepared by combinatorial processes of rapid solidification, reciprocating extrusion and extrusion. Microstructure was evaluated on SEM and TEM. The average grain size of the alloy is 0.7 μm, the size of the second phase at grain boundary is 0.15 μm, and the size of the intragranular precipitates in round shape is less than 20 nm, Superplastic behavior of the material was investigated in a temperature range of 150 to 250 ℃ and initial strain rate range of 3.3×10^-4 to 3.3 × 10^-2 s^-1 in air. The highest elongation of 270% was obtained at 250 ℃ and 3.3 × 10^-3 s-L High-strain-rate superplasticity and low-temperature superplasticity were achieved. The superplasticity results from intragranular sliding (IGS) at temperatures from 170 to 〈 200 ℃ and grain boundaries sliding (GBS) at 250 ℃. At 200 ℃ a combination of IGS and GBS contributes to the superplastic flow. RRE-Mg66 alloy with a composition of Mg-6.0%Zn-1.0%Y-0.6%Ce-0.6Zr was prepared by combinatorial processes of rapid solidification, reciprocating extrusion and extrusion. Microstructure was evaluated on SEM and TEM. The average grain size of the alloy is 0.7 μm, the size of the second phase at grain boundary is 0.15 μm, and the size of the intragranular precipitates in round shape is less than 20 nm, Superplastic behavior of the material was investigated in a temperature range of 150 to 250 ℃ and initial strain rate range of 3.3×10^-4 to 3.3 × 10^-2 s^-1 in air. The highest elongation of 270% was obtained at 250 ℃ and 3.3 × 10^-3 s-L High-strain-rate superplasticity and low-temperature superplasticity were achieved. The superplasticity results from intragranular sliding (IGS) at temperatures from 170 to 〈 200 ℃ and grain boundaries sliding (GBS) at 250 ℃. At 200 ℃ a combination of IGS and GBS contributes to the superplastic flow.
出处 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2012年第6期1033-1037,共5页 武汉理工大学学报(材料科学英文版)
基金 Funded by the National Natural Science Foundation of China (No. 50271054) the Doctoral Programs Foundation of Ministry of Education of China (No. 20070700003) the Science and Technologies Foundation of Henan of China (No. 102102210031) the Natural Science Foundation of Henan Educational Committee of China(2010A430008)
关键词 rapid solidification reciprocating extrusion EXTRUSION SUPERPLASTICITY rapid solidification reciprocating extrusion extrusion superplasticity
  • 相关文献

参考文献18

  • 1Friedrich H, Schumann S. Research for a "New Age of Magnesium" in the Automotive Industry[J]. J. Mater. Proc. Tech., 2001, 117(23): 276.
  • 2DuffL. Magnesium alloys: The Light Choice for Aerospace [J]. Mater. world, 1996,4(3):127.
  • 3Aghion E, Bronfin B, Eliezer D. The Role of the Magnesium Industry in Protecting the Environment [J]. J. Mater. Proc. Tech., 2001, 117(3): 381.
  • 4Bae DH, Kim SH, Kim DH, et al. Deformation Behavior of Mg-Zn?Y Alloys Reinforced by Icosahedral Quasicrystalline Particles [J].. Acta Mater., 2002, 50(9): 2 343.
  • 5Polmear IJ. Recent Developments in Light Alloys [J]. Mater. Tran.?JIM, 1996,37(2):12.
  • 6Avedesian MM, Baker H. Magnesium and Magnesium Alloys [M]. ASM International, 1999.
  • 7Horita Z, Matsubara K, Markii K, et al. A Two-step Processing Route for Achieving a Superplastic Forming Capability in Dilute Magnesium Alloys [J]. Scripta Mater., 2002, 47(4): 255.
  • 8Langdon TG. Mechanical Properties of Superplastic Materials[J]. Metall. Tran. A, 1982, 13A(5): 689.
  • 9Lin HK, Huang JC, Langdon TG. Relationship Between Texture and Low Temperature Superplasticity in an Extruded AZ31 Mg Alloy Processed by ECAP [J].. Mater. Sci. Eng. A, 2005, 402(1-2): 250.
  • 10Watanabe H, Mukai T, Ishikawa K, et al. Realization of High-strain?rate Superplasticity at Low Temperatures in a Mg-Zn-Zr Alloy[J]. Mater. Sci. Eng. A, 2001, 307 (1-2): \19.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部