摘要
通过对LCD1602/LCD12864显示模块控制时序和指令集的对比分析,利用Verilog HDL描述语言完成了多功能LCD显示控制模块的IP核设计.所设计的LCD显示控制器具有很好的可移植性,只需通过端口的使能参数配置便可以驱动LCD1602/LCD12864模块实现字符或图形的实时显示,并且该多功能LCD控制器的可行性也在CycloneII系列的EP2C5T144C8 FPGA芯片上得到了很好的验证。
Based on comparison and analysis of LCD1602/LCD12864 display module control time sequence and the instruction set, this paper presents a new design to achieve multifunctional LCD controller IP core with Verilog HDL The design has the advantages of real-time display and easy portability; it can drive the LCD1602/LCD12864 module to realize the character or graphic display by the eoniiguring parameter of the input port. Moreover, the design had been successfully implemented on FPGA development board (Ahera EP2C5T144CS).
出处
《电子设计工程》
2012年第23期150-152,156,共4页
Electronic Design Engineering
基金
陕西省教育厅科研资助项目(12JK0552)
关键词
FPGA
LCD显示控制器
IP核
有限状态机
Field Programmable Gate Array (FPGA)
Liquid Crystal Display (LCD) controller
Intellectual Property (IP) core
Finite State Machine (FSM)