Temperature Measurements During Dental Cutting Using an Internally Cooled Diamond Dental Bur
Temperature Measurements During Dental Cutting Using an Internally Cooled Diamond Dental Bur
出处
《材料科学与工程（中英文B版）》
2012年第10期551-559,共9页
Journal of Materials Science and Engineering B
关键词
内部冷却
牙科手机
温度测量
牙钻
冷却方法
钻石
切割
散热能力
Dental burs, pulp chamber temperature, tooth temperature rise, water cooling, cavity preparation
参考文献13
-
1L. Zach, G. Cohen, Pulp response to externally applied heat, Oral. Surg. Oral. Med. Oral. Pathol. 19 (1965) 515-530.
-
2B. Ozturk, A. Usumez, A.N. Ozturk, F. Ozer, In vitro assessment of temperature change in the pulp chamber during cavity preparation, J. Prosthet. Dent. 91 (2004) 436-440.
-
3P. Ottl, H.C. Lauer, Temperature response in the pulpal chamber during ultrahigh-speed tooth preparation with diamond burs of different grit, J. Prosthet. Dent. 80 (1998) 12-19.
-
4T.F. Watson, D. Flanagan, D.G. Stone, High and low torque handpieces: Cutting dynamics, enamel cracking and tooth temperature, British Dent. 1. 188 (2000) 680-686.
-
5P.D. Laforgia, C. Morea, A. Desiate, Temperature change in the pulp chamber during complete crown preparation, 1. Prosthet. Dent. 65 (1991) 56-61.
-
6H.C. Lauer, E. Kraft, W. Rothlauf, T. Zwingers, Effects of the temperature of cooling water during high-speed and ultrahigh-speed tooth preparation, J. Prosthet. Dent. 63 (1990) 407-414.
-
7B.N. Calvalcanti, C. Otani, S.M. Rode, High speed cavity preparation technique with different water flows, 1. Prosthet. Dent. 87 (2002) 158-16l.
-
8A.D. Vanderlei, A.L.S Borges, B.N. Cavalcanti, S.M. Rode, Ultrasonic versus high-speed cavity preparation: analysis of increases in pulpal temperature and time to complete preparation, J. Prosthet. Dent 100 (2008) 107-109.
-
9S. Consani, L. Ruhnke, Temperature developed during the cutting of tooth tissue, Bull Tokyo Dent Coll 17 (1976) 101-105.
-
10DJ. Evans, P.R. Wilson, The effect of tooth preparation on pressure measured in the pulp chamber: A laboratory study, Int. J. Prosthodont 12 (1999) 439-443.
-
1Farshid Sadeghi【美】 王智勇(译) 刘耀中(校).综述：滚动轴承接触疲劳[J].国外轴承技术,2010(4):1-15.
-
2陈昭莲.采用新的拉铰方式,提高小孔加工质量[J].机床与液压,2005,33(5):184-184.
-
3Farshid Sadeghi.综述：滚动轴承接触疲劳[J].轴承技术,2011(4):33-40.
-
4SIC705单轴等温离心压缩机[J].机电新产品导报,1995(6):34-34.
-
5赵虹.双螺杆挤出机轴内冷却系统[J].现代塑料加工应用,2004,16(3):44-44.
-
6金英淑,李建红,张重兰.牙钻消毒盒消毒效果的实验观察[J].口腔材料器械杂志,1998,7(4):193-195.
-
7施长岗,王成.高速涡轮牙钻手机结构改进及常见故障检修[J].科技广场,2014(2):106-108.
-
8王成,岳波.一种牙钻手持器械的优化设计[J].常州工学院学报,2012,25(6):33-36.
-
9严一凡.不用牙钻治蛀牙[J].科技新时代,2010(2):24-24.
-
10一欣.激光治牙仪[J].世界发明,1998(3):12-12.
