期刊文献+

A Takagi-Sugeno-Kang (TSK) Power Model Using Compressed-sensing Sampling

采用压缩感知采样的Takagi-Sugeno-Kang(TSK)功率模型(英文)
下载PDF
导出
摘要 More and more information are needed in social life and commercial production, causing significant pressure on the sampling and too much time spent on signal sampling. Compressed sensing is one emerging hotspot in signal processing which employs a special sampling method to capture and represent compressible signals at a rate significantly below the Nyquist rate. In this paper, a Takagi-Sugeno-Kang (TSK) Model based on compressed-sensing sampling theorem is proposed for grinding power. It is further tested by using the actual production data, and the algorithm performance in grinding power model is also analyzed. The experiments show the validity and effectiveness of the proposed modeling method and its bright application foreground in other fields with similar features, such as power, metallurgy and so on. More and more information are needed in social life and commercial production, causing significant pressure on the sampling and too much time spent on signal sampling. Compressed sensing is one emerging hotspot in signal processing which employs a special sampling method to capture and represent compressible signals at a rate significantly below the Nyquist rate. In this paper, a Takagi-Sugeno-Kang (TSK) Model based on compressed-sensing sampling theorem is proposed for grinding power. It is further tested by using the actual production data, and the algorithm performance in grinding power model is also analyzed. The experiments show the validity and effectiveness of the proposed modeling method and its bright application foreground in other fields with similar features, such as power, metallurgy and so on.
出处 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2012年第6期1161-1166,共6页 中国化学工程学报(英文版)
基金 Supported by the National Basic Research Program of China (2009CB320601) the Fundamental Research Funds for the Central Universities of China (N100408001)
关键词 BENEFICIATION GRINDING Takagi-Sugeno-Kang compressed sensing 信号采样 可压缩 传感 型号 电源 o型 磨削加工 功率消耗
  • 相关文献

参考文献23

  • 1Radharkrishnan, V.R, "Model based supervisory control of a ball mill grinding circuit", J. Process Control, 9 (3),195-211 (1999).
  • 2Ramasamv, M., Narayanan, S.S., Rao, C.D.P., "Control of ball mill grinding circuit using model predictive control scheme", J. Process Control, 15 (3), 273-283 (2005).
  • 3Najim, K., Delvilar, R., Valenzuela, J.. "Self-optimization of an autogenous grinding circuit", J. Mineral Eng., 8 (12), 1513-1522 (1995).
  • 4Munoz, C., Cipriano, A., "An integrated system for supervision and economic optimal control of mineral processing plants", J. Mineral Eng., 12 (6), 627-643 (1999).
  • 5Mathews, A.P., Panda, K.K., "Analysis of absorption and reaction kinetics in the oxidation of organics it effluents using a porous electrode ozonator", Chin. J. Chem. Eng., 20 (3), 417-425 (2012).
  • 6Hong, Y.X., Deng, X.H., Zhang, L.S., "3D numerical study on compound heat transfer enhancement of converging- diverging tubes equipped with twin twisted tapes", Chin. J. Chem. Eng., 20 (3), 589-601 (2012).
  • 7Lestage, R., Pomerleau, A., Hodouin, D., "Constrained real-time optimization of a grinding circuit using steady-state linear programming supervisory control", J. Powder Technol, 124 (3), 254-263 (2002).
  • 8Kis, P.B., Mihyk, Cs., Lakatos, B.G., "Optimising design of continuous grinding mill-classifier systems", J. Chem. Eng. Process, 44 (2), 273-277 (2005).
  • 9Donoho, D., "High-dimensional centrally symmetric polytopes with neighborlines proportional to dimension", J. Discrete & Computational Geometry, 35 (4), 617-652 (2006).
  • 10Candes, E., Romberg, J., Tao, T., "Robust uncertainty principles: Exact signal reconstruction from highly incomplete frequency information", J. IEEE Transactions on Information Theory, 52 (2), 489-509 (2006).

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部