期刊文献+

ICP-AES法测定镁合金中的钐、镝、钬、钆、锑、铋、锡 被引量:4

Determination of Sm,Dy,Ho,Gd,Sb,Sn,Bi in magnesium alloy by ICP-AES
下载PDF
导出
摘要 用ICP-AES法测定镁合金中的钐、镝、钬、钆、锑、铋、锡含量.通过对溶样酸及溶样酸度、基体干扰的考察,确定了最佳试验条件,并选择了最佳测定谱线.试验结果表明,在选定的条件下,各元素的检出限均小于0.01μg/mL,方法测定下限均小于0.005%.本法的回收率在98.0%~100.7%之间,相对标准偏差在2.21%~6.11%之间,与比色法测定结果一致.本法快速、准确,能够满足镁合金新材料研究的需要. Determination of Sm,Dy, Ho, Gd,Sb, Sn, Bi in magnesium alloy by ICP-AES was introduced in this paper. The optimum conditions of experiment and the analytical spectral lines are obtained by dissol- ving acid and acidity as well as matrix interference. Detection limit of each element is less than 0.01 μg/mL under selected condition, and the detection limits by this method are all less than 0. 005 %. The recovery by this method is between 98.0%-100.7%, and the relative precision is between 2.21 0/oo-6.11%. All experi- mental results correspond to that by colorimetry, meaning that the method is quick and precise, and has a good application prospect.
出处 《材料研究与应用》 CAS 2012年第4期286-290,共5页 Materials Research and Application
关键词 ICP-AES 镁合金 ICP-AES magnesium alloy Sin Dy Ho Gd Sb Sn Bi
  • 相关文献

参考文献3

  • 1全国稀土标准化技术委员会.GB/T4183-2004稀土镁硅铁合金[S].北京:中国标准出版社,2004.
  • 2全国有色金属标准化技术委员会.GB/T13748.20-2009镁及镁合金化学分析方法第20部分:ICP-AES测定元素含量[S].北京:中国标准出版社,2009.
  • 3全国有色金属标准化技术委员会.GB/T19078-2003铸造镁合金锭[S].北京:中国标准出版社,2004.

同被引文献32

引证文献4

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部