期刊文献+

桉木板皮及桉树皮对硫酸盐法制浆的影响研究 被引量:4

Study of the Effects of Slab Edgings and Bark of Eucalyptus on Its Kraft Pulping
下载PDF
导出
摘要 用于造纸的木材资源日益紧张,通过蒸煮实验,并对蒸煮所得的黑液、纸浆进行分析、检测,以研究桉木板皮按不同配比配入桉木片中进行硫酸盐法制浆的可行性,以及桉树皮对桉木制浆的影响。 By the cooking experiment and analyses of the resulted pulp and black liquor,the possibility of using dif- ferent ratio of eucalyptus slab edgings with euealyptus wood chip for kraft cooking was studied, and the effect of bark on eucalyptus pulping was also discussed.
出处 《造纸科学与技术》 北大核心 2012年第6期20-23,42,共5页 Paper Science & Technology
关键词 桉木板皮 桉树皮 硫酸盐法制浆 可行性 影响 eucalyptus slab edgings eucalyptus bark kraft pulping possibility effect
  • 相关文献

参考文献6

二级参考文献10

  • 1周学飞,余家鸾,陈嘉翔.雷林一号桉木材AS-AQ蒸煮及残余木素和溶出木素的特性[J].中国造纸,1993,12(1):9-14. 被引量:9
  • 2Matheison B A,et al. RDH pulping of southern hardwoods. Tappi J,1996,79(5):180
  • 3Macleod J M. Extended delignification:a status report. Appita,1993,46(6):445
  • 4Swift L K,et al. Rapid displacement heating in batch digesters. Pulp & Paper Canada,1988,89(8):70
  • 5Evans J C W. Batch digester heat displacement system reduces steam consumption. Pulp & Paper,1989,63(7):132
  • 6Pu Q S, et al. Pulping chemistry and kinetics of RDH process. Appita,1993,46(4):277
  • 7Abuhasan M J,et al. The effect of alkali charge and white liquor sulfidity on rapid displacement heating (RDH) kraft pulping. 1992 Tappi pulping conference proceedings,1992:1023
  • 8Kettunen A,et al. Effect of cooking stage EA concentration profiles on softwood kraft pulping. Paperi Ja Puu,1997,79(4):232
  • 9Andrews E K. RDH kraft pulping to extent delignification decrease effluent,and improved productivity and pulp properties. Tappi J,1989,72(11):55
  • 10陈嘉翔.硫酸盐纸浆的RDH蒸煮与低毒性/无毒性漂白的进展[J].中国造纸,1992,11(2):54-58. 被引量:6

共引文献23

同被引文献38

  • 1方红,刘善辉.造纸纤维原料的评价[J].北京木材工业,1996,16(2):19-22. 被引量:42
  • 2彭万喜,李凯夫,范智才.尾巨桉木片水抽提物成分的GC/MS分析[J].中国造纸学报,2006,21(4):11-13. 被引量:10
  • 3詹怀宇.制浆原理与工程[M].北京:中国轻工业出版社,2009,1.
  • 4邓聚龙.灰色系统基本方法[M].武汉:华中理工大学出版社,1988..
  • 5Taguchi, G. Introduction to Ouality Engineering[M]. Tokyo:Asian Productivity Organization, 1990: 1-3.
  • 6Elsayed E A, Chen A. Optimal levels of process parameters for products with multiple characteristics[J]. The International Jonrnal of Production Research, 1993, 31 (5): 1117-1132.
  • 7Tarng Y S, Juang S C, Chang C H. The use of grey-based Taguchi methods to determine submerged arc welding process parameters in hard facing[J]. Journal of Materials Processing Technology, 2002,128(1): 1-6.
  • 8Kuo C F J, Su T L, Tsai C P. Optimization of the needle punching process for the non-woven fabrics with multiple quafity characteristics by grey-based Taguchi method[J].Fiber Polym. 2008(8): 654-664.
  • 9Mavruz S, Ogulata R T. Taguchi approach for the optimisation of the bursting strength of knitted fabrics[J]. Fibres Text East Eur, 2010(18): 78-83.
  • 10Kuo C F J, Su T L. Optimization of multiple quality characteristics for polyether ether ketone injection molding process[J]. Fibers and Polymers, 2006, 7(4): 404-413.

引证文献4

二级引证文献14

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部