期刊文献+

碳化铬涂层T/P24在750℃空气中的抗氧化性能研究 被引量:2

Oxidation of Chrome Carbide Coated by T/P 24 in Air at 750℃
下载PDF
导出
摘要 采用粉体埋入辅助涂层法在T/P 24表面制备了碳化铬涂层。采用质量变化、物相变化研究了PIRAC碳化铬涂层T/P 24在750℃空气中的氧化行为。结果表明:氧化后碳化铬涂层试样表面观察不到形貌变化,几乎检测不到氧化铬和质量变化,证明PIRAC碳化铬涂层具有优良的抗氧化能力。不同温度下制备的PIRAC碳化铬涂层组成的不同,导致涂层表现出不同的抗氧化能力。对涂层组成与抗氧化能力差异和750℃长时间暴露导致涂层中Cr23C6形成Cr3C2现象进行了分析。 Oxidation behaviors of a PIRAC chrome carbide coated by T/P24 was studied in air at 750℃.Weight changes and phase changes were used to analyze the oxidation behaviors.Results show the PIRAC chrome coating can provide good oxidation with scarcely morphologies changes,chrome oxide and weight gains observed after oxidation exposure.The coating prepared at different temperatures shows different oxidation resistance due to different chrome carbides composition.The difference and long time exposure at 750℃ inducing Cr23C6 transformed into Cr3C2 were discussed.
出处 《中国机械工程》 EI CAS CSCD 北大核心 2013年第1期99-103,共5页 China Mechanical Engineering
基金 西北农林科技大学人才专项资金资助项目(Z111021101)
关键词 碳化铬 涂层 氧化 热力学 PIRAC chrome carbide coating oxidation thermodynamics powder immersion reaction assisted coating(PIRAC)
  • 相关文献

参考文献14

  • 1Bendick W, Gabrel J, Hahn B,et al. New Low Al- loy Heat Resistant Ferritic Steels T/P23 and T/P24 for Power Plant Applieation[J]. International Jour nal of Pressure Vessels and Piping, 2007, 84: 13- 20.
  • 2Vaillant J C, Vandenberghe B, Hahn B,et al. T/ P23, 24, 911 and 92, New Grades for Advanced Coal--fired Power Plants--properties and Experi ence[J]. International Journal of Pressure Vessels and Piping, 2008, 85: 38-46.
  • 3Aghajani A, Somsen C H, Pesicka J, et al. Micro structural Evolution in T24, a Modified 2(1/4)Cr 1Mo Steel During Creep After Different Heat Treat- ments[J]. Mater. Sei. Eng. A, 2009, 510/511: 130-135.
  • 4Villars P, Calvert L D. Pearson's Handbook of Crystallographic Data for Intermetallic Phases(Vol. Ⅱ )[M]. Ohio: American Society for Metals, Met als Park, 1985.
  • 5IJaiC P, Fu C T, Duann J R, et al. Chrome Car bide Based Ceramics Composite Block Gauge: US, 5470807[P]. 1995-11-28.
  • 6林立,薛群基,刘惠文.碳化铬金属陶瓷SHS熔覆层的磨料磨损机理研究[J].材料开发与应用,1997,12(5):10-15. 被引量:6
  • 7李剑锋,丁传贤.等离子喷涂Cr_3C_2-NiCr涂层的Vickers硬度研究[J].硅酸盐学报,2000,28(3):223-228. 被引量:11
  • 8赵志星,金山同.碳化铬涂层耐磨性及应用[J].新技术新工艺,2002(4):37-38. 被引量:4
  • 9Wu S J. Processing and Characterization of Chrome Carbide Wear and Oxidation Resistance Coatings on T/P 24 by PIRAC for Power Plant Applications. Research Report for a Post- doctoral Research Summary[R]. Haifa, Israel: Israel Institute of Technology-- Technion, 2010.
  • 10Shenhar A, Gotman I, Gutmanas E Y, et al. Sur- face Modification of Titanium Alloy Orthopaedic Implants Via Novel Powder Immersion Reaction Assisted Coating Nitriding Method[J]. Mater. Sci. Eng. A, 1999, 268(1/2): 40-46.

二级参考文献9

共引文献18

同被引文献29

引证文献2

二级引证文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部