摘要
通过对中国石油克拉玛依石化公司Ⅱ套糠醛精制装置的能耗构成进行分析,发现装置能耗主要由燃料气消耗、自产蒸汽用量、电耗和循环水用量决定。提出降低装置能耗的具体措施,并在检修期间进行整改。通过加热炉节能改造、优化换热流程、停用萃取塔塔底循环回流冷却器和机泵加变频调速器等措施,使装置的燃料气用最、自产蒸汽用量、循环水用量和电耗降低,装置的综合能耗降至639.95 MJ/t,比改造前综合能耗降低27.64%。
The energy consumption of furfural refining unit in Karamay Petrochemical Company was analyzed. It was found that the energy consumption of the unit was mainly depended on the consump- tions of fuel gas,self produced steam,electricity and circulating water. Some countermeasures to reduce the energy consumption were put forward and realized during revamping, such as energy saving reform of heating furnace, optimizing heat exchange flow, removing the cooler for returning stream at the bottom of extraction tower, adding frequency convertor on pumps and so on. Since then, the consumptions of fuel gas, self produced steam, electricity and circulating water reduced significantly, the total energy con- sumption of the unit dropped to 639. 95 MJ/t,which is a reduction of 27. 64% compared with the base case.
出处
《石油炼制与化工》
CAS
CSCD
北大核心
2013年第1期102-105,共4页
Petroleum Processing and Petrochemicals
关键词
糠醛精制
能耗
节能措施
节能效果
furfural refining
energy consumption
energy saving measure
effect of energy conservation