摘要
A differential automatic gain control （AGC） circuit is presented. The AGC architecture contains twostage variable gain amplifiers （VGAs） which are implemented with a Gilbert cell, a peak detector （PD）, a low pass filter, an operational amplifier, and two voltage to current （V-I） convertors. One stage VGA achieves 30 dB gain due to the use of active load. The AGC circuit is implemented in UMC 0.18-um single-poly six-metal CMOS process technology. Measurement results show that the final differential output swing of the 2nd stage VGA is about 0.9-Vpp; the total gain of the two VGAs can be varied linearly from -10 to 50 dB when the control voltage varies from 0.3 to 0.9 V. The final circuit （containing output buffers and a band-gap reference） consumes 37 mA from single 1.8 V voltage supply. For a 50 mV amplitude 60% modulation depth input AM signal it needs 100 us to stabilize the output. The frequency response of the circuit has almost a constant -3 dB bandwidth of 2.2 MHz. Its OIP3 result is at 19 dBm.
A differential automatic gain control （AGC） circuit is presented. The AGC architecture contains twostage variable gain amplifiers （VGAs） which are implemented with a Gilbert cell, a peak detector （PD）, a low pass filter, an operational amplifier, and two voltage to current （V-I） convertors. One stage VGA achieves 30 dB gain due to the use of active load. The AGC circuit is implemented in UMC 0.18-um single-poly six-metal CMOS process technology. Measurement results show that the final differential output swing of the 2nd stage VGA is about 0.9-Vpp; the total gain of the two VGAs can be varied linearly from -10 to 50 dB when the control voltage varies from 0.3 to 0.9 V. The final circuit （containing output buffers and a band-gap reference） consumes 37 mA from single 1.8 V voltage supply. For a 50 mV amplitude 60% modulation depth input AM signal it needs 100 us to stabilize the output. The frequency response of the circuit has almost a constant -3 dB bandwidth of 2.2 MHz. Its OIP3 result is at 19 dBm.
基金
Project supported by the National High Technology Research and Development Program of China(No.2008AA04A 102)
