期刊文献+

室温快速固化环氧胶黏剂的发展现状 被引量:8

Room Temperature Fast Curing Epoxy Adhesive Development Present Situation
下载PDF
导出
摘要 当今世界,胶黏剂是十分重要的黏合材料。胶黏剂的好处不仅在于它能够黏合多种材料,还具有耐油、耐水、耐酸、耐碱、耐有机溶剂等良好性能。胶黏剂的种类有很多,其中环氧胶黏剂一直运用于多个领域,并且凭借其良好的性能,成为黏合的首选,而作为环氧胶黏剂中的冷固化胶——室温快速固化环氧胶黏剂,固化温度在15℃~40℃,为黏合提出了方便的温度要求,因此在环氧胶黏剂中始终占据着重要的位置。但是作为胶黏剂,它还是存在一些弊端。研究将以室温快速固化环氧胶黏剂为中心,重点介绍它的国内外发展现状。 In today's world,adhesive is very important adhesive materials, adhesive is not just the benefits and it can be used for bonding variety of materials, and it has the oil resistance, water resistance, acid, alkali resistance, the good performance of the or- ganic solvent. There are a variety of types of adhesives ; one of the epoxy adhesive has been used in several areas. With its good per- formance, it has become the first choice of bonding, and as the cold curing epoxy adhesive glue - fast curing epoxy adhesive room temperature, curing temperature in 15 ℃-40℃ ,it for bonding is put temperature requirements, so in epoxy adhesive throughout occupies an important position. But as adhesive,it still has some drawbacks. This paper will center the room temperature curing epoxy adhesive, emphasis is laid on the development present situation at home and abroad.
作者 宋军军 张君
出处 《黑龙江科学》 2013年第1期40-41,共2页 Heilongjiang Science
关键词 室温快速固化 环氧 胶黏剂 现状 Room temperature fast curing epoxy present situation
  • 相关文献

参考文献5

  • 1MIZUTAN1 MASANORI,ITO TATSUSHI. Biphenyl-type epoxy resin-based adhesive sheet materials and their cured products[P].JP,CA127:319852,1997.
  • 2汪水平,汪国庆,翁睿.环氧树脂柔性固化剂的合成[J].广东建材,2010,26(10):10-12. 被引量:7
  • 3刘晓非;李爱萍;熊熠燕;曾安蓉.室温固化水性环氧树脂固化剂的制备方法[P]中国,20081015309552008.
  • 4周继亮,涂伟萍,夏正斌.水性环氧固化剂的合成及性能[J].化工新型材料,2005,33(2):25-28. 被引量:22
  • 5SETSUO SATO,RAMIRO CARIELO BUENO,ALEXSSANDER SHIGUERU ARAUJO. Curing agents for epoxy resins[P].US,20200012888,2010.

二级参考文献12

  • 1孙涛,官建国,余剑英,苏良碧.端氨基聚氨酯的合成及增韧环氧树脂的研究[J].高分子材料科学与工程,2005,21(1):117-120. 被引量:45
  • 2王绪文.环氧树脂增韧的研究进展[J].中国胶粘剂,2006,15(2):45-50. 被引量:16
  • 3官建国 王维 龚荣洲.环氧树脂用柔性固化剂工艺的研究.中国胶粘剂,1999,9(5):10-12.
  • 4陈沽 宋启泽.有机波谱分析[M].北京:北京理工大学出版社,1996,9.43-92.
  • 5Glass,J. E. ,Technology for Waterborne Coatings, Chapter 1,American Chemical Society, Washington, D. C. , 1997.
  • 6Hawkins, C. A. Sheppard, A. C. Wood, T. G. [J]. Progress in Organic Coatings. 1997,32(1) : 253-261.
  • 7Jim D. Elmore; Derek S. Kincaid,Pratap C. Komar ; and JonE. Nielsen. [J] .Journal of Coatings Technology. 2002, 74(931) : 63-69.
  • 8Shimp; David A, Hicks; et al. Two component aqueous coating composition based on an epoxy-polyamine adduct and a polyepoxide; United States Patent 4246148 ; January 20, 1981.
  • 9王德中.环氧树脂生产与应用[M].北京:化学工业出版社,2002.
  • 10张保龙,唐广粮,由英才,石可瑜,郭淑华,杜宗杰,黄吉甫.功能基化介晶高聚物增韧环氧树脂性能研究——材料断裂面形态结构与力学性能的关系[J].高分子学报,1999,9(1):74-79. 被引量:26

共引文献25

同被引文献50

引证文献8

二级引证文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部