期刊文献+

绢云母对无机硅酸锌涂层磨损性能的影响

Effect of sericite on wear behavior of inorganic zinc-silicate
下载PDF
导出
摘要 将质量分数为5%的绢云母颗粒添加到无机硅酸锌涂料固相成分中,采用三层刷涂制备涂层,通过干磨损实验和声发射擦伤实验,考察添加绢云母对无机硅酸锌涂料磨损性能的影响.结果表明,绢云母的添加降低了涂层的摩擦系数,减轻了涂层的塑性变形,阻止了涂层内部裂纹的产生和扩展,使涂层声发射信号的强度相对降低,增强了涂层的耐磨性能,一定程度上扩大了涂层的应用空间. Five percent mass fraction of serlcite is added in the solid phase composition of inorganic zinc-silicate coatings. The coatings are prepared by the three-brushing. The performance is tested by dry wear experiments and acoustic emission abrasion experi- ments. The result shows that wear resistance enhanced by reducing the friction coefficient and plastic deformation of coatings, the generation and expansion of internal cracks in the coating is prevented, the strength of acoustic emission signal is reduced, wear resistance of coatings are enhanced by adding sericite. The application space of coating is expanded by adding sericite.
出处 《河南工程学院学报(自然科学版)》 2012年第4期41-45,共5页 Journal of Henan University of Engineering:Natural Science Edition
关键词 绢云母 无机硅酸锌 干磨损 声发射 sericite inorganic zinc-silicate dry wear acoustic emission
  • 相关文献

参考文献8

二级参考文献51

共引文献43

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部