期刊文献+

废浸渍纸粉末用作胶合板脲醛树脂胶填料的研究 被引量:3

Scrap Melamine Impregnated Paper Powder as a Urea-Formaldehyde Resin Adhesive Filler for Plywood
下载PDF
导出
摘要 为降低脲醛树脂胶调胶成本,及有效利用三聚氰胺树脂浸渍纸废料,将浸渍纸边回收、粉碎,以替代工业面粉用作脲醛树脂胶填料,制备胶合板。结果表明:浸渍纸粉末用量为树脂质量的10%~15%时,试板的胶合强度最高;甲醛释放量随浸渍纸粉末比例的增加而降低。浸渍纸粉末作为胶合板用脲醛树脂胶的填料具有可行性。 The authors recycled scrap melamine impregnated paper and then pulverlzect it to powders to be used as a urea formaldehyde (UF) resin adhesive filler for plywood production. Their goal was to reduce the cost of wood adhesive and to minimize pollution from combustion of the impregnated paper. The results showed that adding 10 to 15 percent of the powder, the plywood bonding strength was considerably improved. It was also determined that formaldehyde emission decreased as the impregnated paper powder was increased.
出处 《木材工业》 北大核心 2013年第1期47-49,共3页 China Wood Industry
基金 林业公益性行业科研专项经费(201104004)
关键词 胶合板 废浸渍纸粉末 脲醛树脂 填料 胶合强度 甲醛释放量 plywood scrap melamine impregnaed paper powder UF resin filler bonding strength formaldehyde emission
  • 相关文献

参考文献5

二级参考文献36

共引文献14

同被引文献48

  • 1李岚,袁莉,梁国正,谢建强.工艺参数对聚脲甲醛包覆环氧树脂微胶囊物性的影响[J].复合材料学报,2006,23(5):51-57. 被引量:14
  • 2黄泽恩,史广兴.低毒脲醛胶用于杨木胶合板的研究[J].木材工业,1996,10(6):12-14. 被引量:3
  • 3Hui-wang Cui,Guan-ben Du.Development of a novel polyvinyl acetate type emulsion curing agent for urea formaldehyde resin[J].Wood Sci Technology,2013,47:105-119.
  • 4Amine Moubarik,Hamid Reza Mansouri,Antonio Pizzi.Improving UF particleboard adhesives water resistance by small albumin and sunflower oil additions[J].Eur J Wood Prod,2013,71:277-279.
  • 5Charalampos Lykidis,Chrysanthi Parnavela,Nikolaos Goulounis,et al.Potential for utilizing waste corrugated paper containers into wood composites using UF and PMDI resin systems[J].Eur J Wood Prod,DOI:10.1007/s00107-012-0618-7.
  • 6X Zhou,H A Essawy,A Pizzi,et al.Poly(amidoamine)s dendrimers of different generations as components of melamine urea formaldehyde(MUF)adhesives used for particleboards production:What are the positive implications[J].Journal of Polymer Research,2013,20:267-280.
  • 7Ivana Gavrilovic-Grmusa,Manfred Dunky,Jovan Miljkovic,et al.Influence of the degree of condensation of ureaformaldehyde adhesive on the tangential penetration into beech and fir and on the shear strength of the adhesive joints[J].Eur J Wood Prod,2012,70:655-665.
  • 8Ida Poljansek,Blaz Likozar,Natasa Cuk,et al.Curing kinetics study of melamine-urea-formaldehyde resin/liquefied wood[J].Wood Sci Technology,2013,47:395-409.
  • 9Anuj Kumar,Arun Gupta,K V Sharma,et al.Use of aluminum oxide nanoparticles in wood composites to enhance the heat transfer during hot-pressing[J].Eur J Wood Prod,2013,71:193-198.
  • 10Xing-Xia Ma,Yu-Zhang Wu,Hai-Long Zhu.The fireretardant properties of the melamine-modified ureaformaldehyde resins mixed with ammonium polyphosphate[J].J Wood Sci,2013,59:419-425.

引证文献3

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部