期刊文献+

等离子熔覆铁基合金+镍包WC复合涂层热力学分析 被引量:2

The Thermodynamics Analyses of Composites Coatings Plasma Cladding of Fe-base Alloy+WC
下载PDF
导出
摘要 基于X射线衍射分析和Thermo-calc软件热力学平衡相计算,研究了在Q235钢基体上等离子熔覆添加的镍包WC含量为10%、30%、50%的铁基合金涂层的组织演变过程和WC含量变化对涂层相的影响,分析了各相的析出规律,并将计算结果与试验结果进行了分析与比较,得出计算结果与试验结果基本吻合.该研究为进一步挖掘涂层组织潜力和改善熔覆工艺提供了理论依据. The microstructure evolution of the cladding layer formed by plasma cladding Fe-base with 10%, 30% and 50% WC respectively on Q235 steel are studied on the analysis by XRD and the calculation of Thermodynamic equilibrium phase using Thermo-calc software. Equilibrium phases in the cladding layer and the effect of the WC content on the coating are studied. The calculation results are in accordance with the experiment results, which give theoretic basis for utilizing the coating microstructure potential and improving cladding process.
出处 《中原工学院学报》 CAS 2012年第6期19-21,25,共4页 Journal of Zhongyuan University of Technology
基金 河南省基础与前沿技术研究计划项目(072300440020) 河南省教育厅基础研究项目(12A430022)
关键词 等离子熔覆 组织 THERMO-CALC WC+Fe-Cr-B-Si plasma cladding phase Thermo-calc WC+Fe-Cr-B-Si
  • 相关文献

参考文献11

二级参考文献106

共引文献133

同被引文献23

引证文献2

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部