期刊文献+

加压蒸汽热处理柞木化学组分变化的比较 被引量:7

Comparative on Chemical Component Changes of Pressurized-Steam-Treated Mongolian Oak
下载PDF
导出
摘要 木材热处理目前是木材物理改性领域的一个研究热点,也是产业应用较为成功的一种木材改性方法。木材经过热处理后,尺寸稳定性与生物耐久性都获得了提高,材色也明显加深, Mongolian oak wood were thermally treated in atmospheric steam or 0.35 MPa pressurized steam.Chemical component changes of the treated samples were investigated by means of wet chemical analysis,elemental analysis and FTIR analysis.The results showed that,along with higher lignin and extractive contents,samples treated in pressurized steam exhibited lower holocellulose and moisture content compared with those treated in atmospheric steam.The analyses also suggested greater chemical structure changes in pressurized-steam-treated samples.Meanwhile,it could be determined that thermal degradation of both samples was modest at the treatment temperature of 185 ℃.These findings help explain the better dimensional stability and limited strength deterioration of wood treated in pressurized steam.
出处 《林业科学》 EI CAS CSCD 北大核心 2012年第12期148-152,共5页 Scientia Silvae Sinicae
基金 江苏高校优势学科建设工程资助项目
关键词 木材热处理 加压蒸汽 化学组分变化 wood heat treatment pressurized steam chemical component
  • 相关文献

参考文献25

  • 1丁涛,顾炼百,吴昊.蒸汽压力对热处理材力学性能影响的机理研究[J].林产工业,2010,37(1):16-18. 被引量:8
  • 2顾炼百,丁涛,吕斌,朱昆.压力蒸汽热处理木材生物耐久性的研究[J].林产工业,2010,37(5):6-9. 被引量:18
  • 3Akgül A,Gümüskaya E,Korkut S. Crystalline structure of heattreated Scots pine[Pinus sylvestris L.]and Uluda(g) fir[Abies nordmanniana (Stev.) subsp.bornmuelleriana (Mattf.)]wood[J].Wood Science and Technology,2007,(03):281-289.
  • 4Borrega M,K(a)renlampi P P. Mechanical behavior of heat treated spruce(Picea abies)wood at constant moisture content and ambient humidity[J].Holz als Roh-und Werkst,2008,(01):63-69.
  • 5Borrega M,K(a)renlampi P P. Effect of relative humidity on thermal degradation of Norway spruce(Picea abies)wood[J].Journal of Wood Science,2008,(04):323-328.
  • 6Dagbro O,Torniainen P,Karlsson O. Colour responses from wood,thermally modified in superheated steam and pressurized steam atmospheres[J].Wood Material Science and Engineering,2010,(3/4):211-219.
  • 7Ding T,Gu L,Li T. Influence of steam pressure on physical and mechanical properties ofheat-treated Mongolian pine lumber[J].European Journal of Wood and Wood Products,2011,(01):121-126.
  • 8Dubey M K,Pang S,Walker J. Effect of oil heating age on colour and dimensional stability of heat treated Pinus radiata[J].European Journal of Wood and Wood Products,2011,(02):255-262.
  • 9Esteves B,Marques A V,Domingos I. Heat-induced colour changes of pine(Pinus pinaster) and eucalypt (Eucalyptus globulus)wood[J].Wood Science and Technology,2008,(05):369-384.
  • 10Hakkou M,Pétrissans M,Gérardin P. Investigations of the reasons for fungal durability of heat-treated beech wood[J].Polymer Degradation and Stability,2006,(02):393-397.doi:10.1016/j.polymdegradstab.2005.04.042.

二级参考文献27

  • 1Kamdem D P, Pizzi A, Jermannaud A. Durability of heat-treated wood [Jl. Holz als Rob- und Werkstoff, 2002, 60: 1.-6.
  • 2Korkut D S, Gullet B. The effects of heat treatment on physical properties and surface roughness of red-bud maple ( Acer trautvetteri Medw. ) wood [ J].Bioresource Technology 2007, doi: 10. 1016/j, biortech. 2007.06. 043.
  • 3Korkut S, Hiziroglu S. Effect of heat treatment on mechanical properties of hazelnut wood (Corylus columa L. ) [ J ]. Materials and Design 2008, doi : 10. 1016/j. matdes. 2008.07. 009.
  • 4Poncsak S, Kocaefe D, Bouazara M. , Pichette A. Effect of high temperature treatment on the mechanical properties of birch ( Betula papyrifera) [ J]. Wood Science and Technology, 2006, 40 : 647--663.
  • 5Esteves B, Marques A V, Domingos I, Pereira H. Heat-induced colour changes of pine ( Pinus pinaster) and eucalypt ( Eucalyptus globulus) wood[ J]. Wood Science and Technology, 2008, 42 : 369-384.
  • 6Borrega M, Karenlampi P P. Hygroscopicity of heat-treated spruce wood [ C 1. In Proceedings of the Nordic Workshop in Wood Engineering, Skelleftea, Sweden, February 21, 2007, 3-11.
  • 7Boonstra M J, Tjeerdsma B. Chemical analysis of heat treated softwoods [ J]. Holz als Roh - und Werkstoff, 2006, 64 : 204-211.
  • 8Tjeerdsma B F, Boonstra M, Pizzi A, Tekely P, Militz H. Characterisation of thermally modified wood : molecular reasons for wood performance improvement[ J]. Holz als Roh-und Werkstoff, 1998, 56: 149-153.
  • 9Alen R, Kotilainen R, Zaman A. Thermochemieal behavior of Norway spruce ( Picea abies) at 180-225 ℃[ J ]. Wood Science and Technology, 2002, 36: 163-171.
  • 10Shi J L, Kocaefe D, Zhang J. Mechanical behaviour of Quebecwood species heat-treated using ThermoWood process [ J ]. Holz als Roh-und Werkstoff, 2007, 65: 255-259.

共引文献22

同被引文献118

引证文献7

二级引证文献67

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部