期刊文献+

低碳源污水处理应用MBR工艺设计 被引量:2

DESIGN OF MEMBRANE BIOREACTOR PROCESS IN A LOW CARBON SOURCE MUNICIPAL SEWAGE TREATMENT PLANT IN TAIHU BASIN
下载PDF
导出
摘要 太湖流域某污水处理厂进水COD低、而氮磷质量浓度偏高,属于低碳源城市污水处理,生物脱氮除磷难度大,本工程采用先进的MBR工艺,其生物段为强化生物脱氮除磷功能的预缺氧改良AAO工艺(A-A2O),脱氮除磷效果好,且节省外加碳源和除磷药剂,出水水质稳定优于GB 18918-2002一级A类排放标准,可作为再生水回用。 The concentration of influent COD is low, but nitrogen and phosphorus are on the high side in Taihu basin. For this type of low carbon municipal sewage treatment, biological nitrogen and phosphorus removal is a problem ofWWTP. The advanced process Membrane Bioreator(MBR) was applied to this plant. And the A-A2O process was operated in the biological treatment reactor, which strengthened the function of biological nitrogen and phosphorus removal. This system has got a good effect ofnitrogen and phosphorus removal , and saved the dosage ofadscititious carbon and chemical medicament. The effluent quality was better than the A criteria of Class I specified in Discharge standard of pollutants for municipal wastewater treatment plant(GB 18918--2002). And it can be used as the reclaimed water.
出处 《水处理技术》 CAS CSCD 北大核心 2013年第2期130-132,共3页 Technology of Water Treatment
关键词 低碳源 MBR工艺 A—A2 O 脱氮除磷 low carbon source membrane bioreator (MBR) preanoxic anaerobic/anoxic/oxic nitrogen and phosphorus removal
  • 相关文献

参考文献2

二级参考文献12

共引文献35

同被引文献26

引证文献2

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部