期刊文献+

油源动态特性及伺服阀前蓄能器对轧机控制精度影响的实验研究 被引量:1

Experimental Research on Influences of Dynamic Characteristics of Oil Source and Accumulator at Inlet of Valve on Mill Control Precision
下载PDF
导出
摘要 在实验的基础上,对油源动态特性与电液控制系统控制精度间的关系展开实验研究,得出了负载变动与油源压力波动之间的耦合规律,并对阀前蓄能器进行不同初始充气压力和不同初始容积的负载实验,得出其初始充气压力和初始容积的影响规律,为根据系统控制精度要求选择充气压力和初始容积提供实践参考。 Based on experiments, the relationship between dynamic characteristics of oil source and control precision was analyzed in detail, and the coupling laws between the load variation and the pres- sure ripple of oil--source were obtained. Thus, starting with precharge pressure and volum of the ac- cumulator at inlet of the valve, the rule was obtained by experiments, which can give reference for se- lecting precharge pressure and volum of the accumulator according to the requirements of system con- trol precision.
出处 《中国机械工程》 EI CAS CSCD 北大核心 2013年第3期375-379,共5页 China Mechanical Engineering
基金 国家自然科学基金资助项目(50675189) 河北省自然科学基金资助项目(E2009000405)
关键词 油源 液压厚度自动控制 恒压变量泵 蓄能器 oil--source hydraulic automatic gauge control~ constant pressure variable displace-ment pump~ accumulator
  • 相关文献

参考文献8

二级参考文献12

  • 1张浩,胡文瑾,林芝平,陆元章,徐伟国.宝钢2030mm冷连轧机速度控制系统的分析和仿真研究[J].冶金自动化,1989,13(1):31-36. 被引量:10
  • 2罗晓鸣.常规皮囊蓄能器和串联皮囊蓄能器衰减压力脉动性能的研究:硕士学位论文[M].哈尔滨:哈尔滨工业大学,1988..
  • 3Slmsek B H. Dynamic Simulation of Dual-Continuous Strip Processing Operations. Iron and Steel Engineer, 1997,74 (6) :184-191.
  • 4Yoshikazu Mori. Modernization of Gage Control System at Sumitomo Wakayama 5- stand Cold Mill. Iron and Steel Engineer, August 1999, 46(5):46-50.
  • 5任锦堂.键合图理论[M].上海:上海交通大学出版社,1984..
  • 6Reddy N V, Suryanarayana G. A set-up model for tandem cold rolling mills. Journal of Materials Processing Technology, 2001, 116(3): 269-277.
  • 7Yun I S, Wilson W R D, Ehmann K F. Review of chatter studies in cold rolling. International Journal of Machine Tools & Manufacture, 1998, 38:1 499-1 530.
  • 8高英杰,赵静一,孔祥东,王益群.板带轧机液压AGC系统的动态模拟[J].中国机械工程,1998,9(7):23-26. 被引量:23
  • 9高慧敏,曾建潮.热连轧生产过程精轧机组的建模与仿真[J].系统仿真学报,2000,12(1):51-53. 被引量:3
  • 10崔建江,吴胜昔,袁枫华,徐心和.仿真技术在冷连轧系统的应用及发展[J].系统仿真学报,2001,13(1):86-88. 被引量:15

共引文献49

同被引文献3

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部