光阴极微波电子枪优化设计的考虑

Consideration of Optimized Design for Photocathode RF Gun

对光阴极微波电子枪进行了优化设计 ,给出了光阳极微波腔的形状、电参数和电场分布 .电子束团初始参数对束流横向发射度的影响 ,用 Parmela程序对其进行了优化 ,得到了一组最优参数 .考虑了补偿线圈对束流发射度的影响 ,对线圈的位置和电流的大小做了优化 .经过优化后得到腔出口处的横向发射度为 1 .39πmm.mrad,达到了设计时的要求 .

A 1.3 GHz photocathode RF gun is under study in peking University. The photocathode RF gun, composed of gun cavity, photocathode and Laser system, is expected to deliver a electron beam with a normalized transverse rms emittance of 1π mm·mrad at a charge of 1nC. Its performance has been studied by the space-charge tracking code PARMELA. The influences of the initialized electron beam were also studied. The emittance compensation technique is employed. After optimization of the parameters was achieved, the normalized transverse emittance is 1.39 πmm·mrad at the gun exit.