摘要
在以造纸废水为主的某污水厂的设计过程中,根据水质特点及回用要求,对板纸生产废水采用水解酸化/射流曝气池/曝气生物滤池/活性炭吸附工艺处理,对生活纸废水采用水解酸化/射流曝气池/活性炭吸附工艺处理,并根据调试情况在板纸生产废水处理工艺中引入芬顿法,从而保证了出水水质达到《城镇污水处理厂污染物排放标准》(GB 18918—2002)的一级A标准。
In the design of a wastewater treatment plant, according to the characteristics of papermaking wastewater and the reuse requirements, the hydrolysis acidification/jet aeration tank/biological aerated filter/activated carbon adsorption process was used to treat paperboard wastewater, and the hy- drolysis acidification/jet aeration tank/activated carbon adsorption process was used to treat tissue paper wastewater. According to the commissioning situation, the Fenton process was introduced in the paper- board wastewater treatment to ensure that the effluent quality meets the first level A criteria specified in Discharge Standard of Pollutants for Municipal Wastewater Treatment Plant （ GB 18918 - 2002 ）.
出处
《中国给水排水》
CAS
CSCD
北大核心
2013年第4期32-35,共4页
China Water & Wastewater
关键词
造纸废水
射流曝气
曝气生物滤池
活性炭吸附
芬顿氧化
papermaking wastewater
jet aeration
biological aerated filter
activated carbon adsorption
Fenton oxidation
