期刊文献+

聚酯改性丙烯酸聚氨酯2K汽车修补漆的研制 被引量:4

Preparation of Automotive Refinishing Paint of Two Package Acrylic Polyurethane Modified by Polyester
下载PDF
导出
摘要 以聚酯树脂对丙烯酸聚氨酯体系进行改性,制备了一种性能优异的2K汽车修补漆。讨论了丙烯酸树脂、聚酯及其加入量、固化剂、n(—NCO)/n(—OH)值、流平剂、防沉剂对漆膜性能的影响,结果表明,当丙烯酸树脂与CARDURA E10(叔碳酸缩水甘油酯)改性聚酯树脂的质量比在(5~3)∶1,以N3390为固化剂,且n(—NCO)/n(—OH)=1.08~1.15,丙烯酸流平剂与有机硅流平剂质量比为10∶3,防沉剂的质量分数为0.54%时,漆膜的性能最佳。 A kind of two-package automotive refinishing paint of superior performance was prepared from acrylic-polyurethanes modified by polyester resin. The effect of acrylic resin, polyester resin and its amount,curing agent, the molar ratio of -NCO/-OH, leveling agent, and anti-settling agent on the film properties was studied. The results show that the film had the best performance when the mass ratio of acrylic resin to polyester resin modified by CARDURA E10(versatate glycidyl) was (5 -3):1, N3390 was used as curing agent,the molar ratio of -NCO/-OH was 1.08 - 1.15 ,the ratio of acrylic leveling agent and silicone leveling agent was 10:3, and the quantity percentage of anti-settling agent was 0. 54% ,the paint film exhibited the best performance.
出处 《精细化工》 EI CAS CSCD 北大核心 2013年第2期198-202,共5页 Fine Chemicals
基金 国家自然科学基金青年科学基金项目(51103045) 中央高校基本科研业务费资助项目(2012ZM0036)~~
关键词 汽车修补漆 CARDURA E10改性聚酯树脂 流平性 光泽度 丙烯酸系列化学品 automotive refinishing paint polyester resin modified by CARDURA El0 levelingproperty gloss acrylic series chemicals
  • 相关文献

参考文献11

二级参考文献22

共引文献26

同被引文献77

  • 1秦传香,杨静.丙烯酸粉末涂料的研究及发展前景[J].化工新型材料,2004,32(6):1-5. 被引量:9
  • 2曹优明,郑仕远.聚酯丙烯酸发光涂料的研制[J].材料保护,2005,38(12):62-64. 被引量:4
  • 3王延飞,沈本贤.端羟基超支化聚酯的制备及表征[J].涂料工业,2006,36(10):1-4. 被引量:9
  • 4Decker C.High-speed curing by laser irradiation[J].Nuclear Instruments and Methods in Physical Research Section B,1999,151:22-28.
  • 5陆世杰.涂料工艺[M].北京:化学工业出版社,1994:1.
  • 6Morgan D,Kalachandra S,Shobha H.Analysis of a dimethacrylate copolymer (bis-GMA and TEGDMA) network by DSC and 13C solution and solid-state NMR spectroscopy[J].Biomaterials,2000,21(18):1897-1903.
  • 7Choi J S,Seo J,Khan S B,et al.Effect of acrylic acid on the physical properties of UV-cured poly(urethaneacrylate-co-acrylic acid) films for metal coating[J].Progress in Organic Coatings,2011,71(1):110-116.
  • 8LEGAULT M, MICHAEL R. Wind Blades: Progress and Challenges[J]. Composites Technology, 2013,19(5): 30- 35.
  • 9SUN Xiao-Jing, HUANG Dian-gui, WU Guo-qing. The Current State of Offshore Wind Energy Technology De- velopment[J]. Energy, 2012, 41:298-312.
  • 10OCHIENG E G, MELAINE Y, POTTS S J. Future for Offshore Wind Energy in the United Kingdom: The Way Forward[J]. Renewable and Sustainable Energy Reviews, 2014, 39(47):655-666.

引证文献4

二级引证文献31

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部