摘要
为了探索滚筒物料填充系数对叶片加料均匀性的影响,采用0.25,0.21,0.17,0.13,0.10共5个梯度填充系数进行加料研究,分析了不同填充系数下加料的均匀性以及加料后叶片含水率的稳定性。结果表明:①填充系数对叶片加料均匀性有一定影响,在0.13～0.25范围内,降低叶片在滚筒内的填充系数能够提高料液在叶片上分布的均匀性;当填充系数<0.13时,随着填充系数的降低,料液在叶片上分布的均匀性也呈下降趋势;②在0.13～0.25范围内调整填充系数对加料后叶片出口含水率稳定性影响不大,当填充系数<0.13时加料出口含水率稳定性相对较差。
In order to investigate the influences of filling coefficient of tobacco in cylinder on the uniformity of tobacco casing, experiments were conducted at filling coefficients of 0.25, 0.21, 0.17, 0.13 and 0.10, and the uniformity of casing and the stability of moisture content in cased strips at different filling coefficients were analyzed. The results showed that： 1） Filling coefficient affected casing uniformity to a certain extent. Within the range from 0.13 to 0.25, the casing uniformity increased with the decrease of filling coefficient, but decreased when the filling coefficient was less than 0.13. 2） Within the range from 0.13 to 0.25, the effects of filling coefficient on the stability of moisture content in output strips were negligible. However, the stability of moisture content would become worse when the filling coefficient was less than 0.13.
出处
《烟草科技》
EI
CAS
北大核心
2013年第2期9-11,共3页
Tobacco Science & Technology
关键词
加料
填充系数
均匀性
稳定性
Casing
Filling coefficient
Uniformity
Stability
